#MegaLogViewer Settings
#Fri Dec 01 13:01:39 PST 2023
APPEND_FIELD_MAPxRPM=[ ] * [Field.RPM] / 100
DATA_FILTER_Cold=[Motor temp.] < 65;Filter to identify and remove data when coolant temperature is below 65 deg C
FIELD_SELECTED_GROUP_Tuning_graph1.3=Ignition angle cyl. 6
FIELD_SELECTED_GROUP_Tuning_graph1.2=Ignition angle cyl. 5
FIELD_SELECTED_GROUP_Tuning_graph1.1=Ignition angle cyl. 4
DATA_FILTER_AFR\ Out\ of\ range=[Field.AFR] > 20 || [Field.AFR] < 10;AFR Above 20 or below 10
FIELD_SELECTED_GROUP_Tuning_graph1.0=Ignition angle cyl. 2
DATA_FILTER_Warm=[Motor temp.] >\= 80;Filter to identify and remove data when coolant temperature is above 80 deg C
DATA_FILTER_Idle\ Range=[Field.TP] \=\= 0 && [Field.RPM] <1000 ;Filter to identify and remove data while at idle
TABLE_GEN_VIEW_Current\ View=24^|^20^|^0^|^2^|^3^|^Field.RPM^|^relativer Oeffnungsquerschnitt^|^Lambdaintegrator 1^|^ ^|^600,900,1000,1100,1300,1400,1600,1800,2000,2200,2400,2700,2900,3000,3100,3400,3600,3900,4200,4600^|^0.10,0.2,0.39,0.61,0.81,1,1.1,1.2,1.39,1.61,2,2.39,2.81,3.2,5,7.5,10.01,14.99,20,25,30,45,64.99,85.01^|^Hits^|^2^|^1^|^Don't Generate X & Y Axis^|^0^|^0
DATA_FILTER_RPM\ Change=abs([Field.RPM] - [RPM-4]) > ([Field.RPM] * 0.05);Filter any data where the engine is experiencing a change in RPM greater than 5%, likely a transient point
FIELD_SELECTED_GROUP_Tuning_graph0.3=Ignition angle cyl. 3
FIELD_SELECTED_GROUP_Tuning_graph0.2=\ 
FIELD_SELECTED_GROUP_Tuning_graph0.1=relativer Oeffnungsquerschnitt
FIELD_SELECTED_GROUP_Tuning_graph0.0=LC 2_LAMBDA_1
FIELD_SELECTED_GROUP_Tuning_graph2.0=Field.RPM
FIELD_GROUP_NAME_Tuning=1
DATA_FILTER_Transients=(abs([Field.RPM] - [RPM-4]) > ([Field.RPM] * 0.10) ) || (abs([Field.TP] - [TP-4]) > 5 )  || (abs([Field.MAP] - [MAP-4]) > ([Field.MAP] * 0.15) )  ;Any data where the engine is going through transient conditions