Link to listing:
I’m looking for $23k as-is.
12/21/24: Updated photos after full exterior/interior detail with 1-step paint correction and ceramic coating
Selling my beloved 2002 E46 M3 Coupe in Jet Black/Imola Red with approximately 134k miles.
Big 3 completed with SMG to 6MT swap:
– Subframe Reinforced (Racewerkz Engineering 12/22/2019)
– VANOS completed (121,340 miles 2/23/2020)
– Rod Bearings done by MRF Engineering (124,742miles 5/21/2020)
– SMG to 6MT Swap by Kaiv (126,481 miles 10/14/2020)
Current Modifications:
– OEM 219Ms with 245/40/18 and 275/35/18 Michelin Pilot Sport 4s
– Status Gruppe CSL Front Bumper with 1×1 CF lip (ABS Autobody paint and install)
– Unknown CSL 2×2 CF Rear Diffuser (ABS Autobody paint and install)
– Karbonius CSL Trunk Carbon Fiber Trunk (ABS Autobody paint and install)
– Porsche 996 Brembo Brake Conversion with Stainless steel lines and RallyRoad brackets
– Autosolutions SSK with weighted ZHP Knob
– Ground Control Single Adjustable Coilovers with GC Camber Plates
– Hotchkis front sway bar
– Euro Headers
– OEM Dual Resonated section 1 (Currently have a used Euro Section 1 with O2 sensors can get installed before sale)
– OEM Exhaust with 76mm Euro Tips
– Eonon headunit
– AKG poly bushings (front/rear control arms, trailing arms and differential)
Car Notes:
– Throws out codes currently for no O2 sensors and also need to relocate IAT sensor because of CSL Front Bumper installation.
– Minor Oil leaks coming from front of oil pan still trying to figure out exact cause. (CPV o-ring, Vanos high pressure line all done)
Please feel free to message me with any questions. I can also provide more photos for serious buyers! Thanks for looking!
I’m looking for $23k as-is.
12/21/24: Updated photos after full exterior/interior detail with 1-step paint correction and ceramic coating
Selling my beloved 2002 E46 M3 Coupe in Jet Black/Imola Red with approximately 134k miles.
Big 3 completed with SMG to 6MT swap:
– Subframe Reinforced (Racewerkz Engineering 12/22/2019)
– VANOS completed (121,340 miles 2/23/2020)
– Rod Bearings done by MRF Engineering (124,742miles 5/21/2020)
– SMG to 6MT Swap by Kaiv (126,481 miles 10/14/2020)
Current Modifications:
– OEM 219Ms with 245/40/18 and 275/35/18 Michelin Pilot Sport 4s
– Status Gruppe CSL Front Bumper with 1×1 CF lip (ABS Autobody paint and install)
– Unknown CSL 2×2 CF Rear Diffuser (ABS Autobody paint and install)
– Karbonius CSL Trunk Carbon Fiber Trunk (ABS Autobody paint and install)
– Porsche 996 Brembo Brake Conversion with Stainless steel lines and RallyRoad brackets
– Autosolutions SSK with weighted ZHP Knob
– Ground Control Single Adjustable Coilovers with GC Camber Plates
– Hotchkis front sway bar
– Euro Headers
– OEM Dual Resonated section 1 (Currently have a used Euro Section 1 with O2 sensors can get installed before sale)
– OEM Exhaust with 76mm Euro Tips
– Eonon headunit
– AKG poly bushings (front/rear control arms, trailing arms and differential)
Car Notes:
– Throws out codes currently for no O2 sensors and also need to relocate IAT sensor because of CSL Front Bumper installation.
– Minor Oil leaks coming from front of oil pan still trying to figure out exact cause. (CPV o-ring, Vanos high pressure line all done)
Please feel free to message me with any questions. I can also provide more photos for serious buyers! Thanks for looking!
Comment