Announcement

Collapse
No announcement yet.

Geo set up for KWV3..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • glendog74
    replied
    The kit should come with fitting instructions to set at a 'base' setting and details ride height as well. Don't set the rear ride height lower than the lowest recommended setting as it makes the car handle like shit :whistle:

    Leave a comment:


  • jibm
    replied
    Gents, anyone got anymore on this, ETA are fitting the KW's on Thursday morning and i'm gonna feel like a bit of a plonker with any settings:gayfight:

    Leave a comment:


  • jibm
    replied
    Originally posted by glendog74 View Post
    Daz is abroad playing golf until next week :gayfight:
    come on Daz, put those golf bats down, the joke is over, you must be much older than i thought? only OAP's go on golf holidays...don't they??:hahaha:

    Leave a comment:


  • Bounce
    replied
    Originally posted by jibm View Post
    GOLF...now that's a good way to fook up a few days away!!
    A good piss up spoiled,as they say.:hahaha::hahaha:

    Leave a comment:


  • jibm
    replied
    Originally posted by glendog74 View Post
    Daz is abroad playing golf until next week :gayfight:
    GOLF...now that's a good way to fook up a few days away!!

    Leave a comment:


  • glendog74
    replied
    Originally posted by jibm View Post
    any news from ya man Daz? :thumbs:
    Daz is abroad playing golf until next week :gayfight:

    Leave a comment:


  • jibm
    replied
    Originally posted by DazBlackCSL View Post
    Awaiting some details :thumbs: The young man in question is in meetings in germany, so as soon as he gets 5 to dig em out will ping em up :thumbs:
    any news from ya man Daz? :thumbs:

    Leave a comment:


  • jibm
    replied
    Originally posted by mattCSLnut View Post
    I still do :thumbs: and I have no rubbing issues whatsoever.
    Did someone mention pix ? :smt047
    Thanks matt :thumbs:

    are you running KW's?

    Leave a comment:


  • mattCSLnut
    replied
    Originally posted by daniel View Post
    Clubsports have topmounts so he would have been running -2 or more. Mattcslnut run 9" rears ET26 on the front with standard camber. search his posts and you will find some pics. :thumbs:
    I still do :thumbs: and I have no rubbing issues whatsoever.
    Did someone mention pix ? :smt047
    Attached Files

    Leave a comment:


  • daniel
    replied
    Originally posted by jibm View Post
    I hoping thats the case, i'm guessing the only real physical difference is that the clubsport's have adjustable top mounts? but does that give you the extra adjustment to stop any potential rubbing issues?
    Clubsports have topmounts so he would have been running -2 or more. Mattcslnut run 9" rears ET26 on the front with standard camber. search his posts and you will find some pics. :thumbs:

    Leave a comment:


  • jibm
    replied
    Originally posted by glendog74 View Post
    Shane ran KW Clubsport so very similar. I'm pretty sure he had no issues whatsoever.

    I hoping thats the case, i'm guessing the only real physical difference is that the clubsport's have adjustable top mounts? but does that give you the extra adjustment to stop any potential rubbing issues?

    Leave a comment:


  • glendog74
    replied
    Originally posted by jibm View Post
    Thinking about it, Shane ran these wheels on his car so i am hoping that they will be ok with the after market KWv3's. Perhaps he will be along soon and can confirm, Shane?:whistle:
    Shane ran KW Clubsport so very similar. I'm pretty sure he had no issues whatsoever.

    Leave a comment:


  • jibm
    replied
    Originally posted by shimmy View Post
    i ran 265/35/18 fronts on any camber but only because my offset was around et34

    i am not sure you will clear the KWV3 springs with a high offset so if your rims are more like et30 then the tyre does start to get pretty close to the wheel arch on around -2 camber especially if setting are run soft
    Thinking about it, Shane ran these wheels on his car so i am hoping that they will be ok with the after market KWv3's. Perhaps he will be along soon and can confirm, Shane?:whistle:

    Leave a comment:


  • jibm
    replied
    Originally posted by DazBlackCSL View Post
    Awaiting some details :thumbs: The young man in question is in meetings in germany, so as soon as he gets 5 to dig em out will ping em up :thumbs:
    Splendid, thanks :thumbs:

    Leave a comment:


  • DazBlackCSL
    replied
    Awaiting some details :thumbs: The young man in question is in meetings in germany, so as soon as he gets 5 to dig em out will ping em up :thumbs:

    Leave a comment:

Working...
X