Stuttering at Spa?

[azrael]

No mate but they will ship here. just give them a bell they are very helpful.:thumbs:

What is your final solution, the second link or both links?

[cantfind1]

No mate but they will ship here. just give them a bell they are very helpful.:thumbs:

[DuncanR]

Lots of things make me wonder.

I tend to put it down to wheel alignment rather than my shit driving!

But yes you make a good point hence why I replaced my pump, filter and regulator a while back and will soon be fitting one of these!

http://www.horsepowerfreaks.com/partdetails/HPF/Fuel/Fuel_Pump_Install_Kits/E46_M3_Walbro_In_Tank/16889

You guys owe me a drink for all this info! haha

Is there a UK supplier of those mate ?

[cantfind1]

Makes you wonder if the HG or oveheating issues could have been caused by lack of fuel on these types of corners

Lots of things make me wonder.

I tend to put it down to wheel alignment rather than my shit driving!

But yes you make a good point hence why I replaced my pump, filter and regulator a while back and will soon be fitting one of these!

http://www.horsepowerfreaks.com/partdetails/HPF/Fuel/Fuel_Pump_Install_Kits/E46_M3_Walbro_In_Tank/16889

You guys owe me a drink for all this info! haha

[shimmy]

Makes you wonder if the HG or oveheating issues could have been caused by lack of fuel on these types of corners

[azrael]

Completely agree!

I was getting it from just below 1/2.

Obviously depends how hard you are pushing it.

Can t wait to get this sorted as it was my biggest problem at the mo.

Be interested to hear your feedback. Have had lots of probs too. (Should learn my lines )

How much is fitting?

[cantfind1]

A nessecity I would say.

I remember Simpsons telling me the fuel system was a crap design for exactly this reason.

Can happen with anything from between 1/2 down to 1/4

Completely agree!

I was getting it from just below 1/2.

Obviously depends how hard you are pushing it.

Can t wait to get this sorted as it was my biggest problem at the mo.

[cantfind1]

Good find

If you have a spare pump (like me) what else would you need and are you gonna buy the kit or just find the bits?

Already spoken to Roy from CA, told him I have the pump already and he said he will sort out the rest of the bits for me.

Give him a call tomorrow Shim tell him you heard it from me.

[azrael]

A nessecity I would say.

I remember Simpsons telling me the fuel system was a crap design for exactly this reason.

Can happen with anything from between 1/2 down to 1/4

[shimmy]

Good find

If you have a spare pump (like me) what else would you need and are you gonna buy the kit or just find the bits?

[cantfind1]

no stuttering, and no remap.:thumbs:

Nothing to do with remap mate, its because in long sweeping right hand curves with low fuel quantity the pump on the right hand side is unable to suck fuel. simples.

[cantfind1]

Have found my solution!! Well CA found it.

http://www.ca-automotive.co.uk/single_prod-cHJvZF9pZD0yOTE5JmNhcl9tYWtlPWJtdyZjYXJfdHlwZT1lNDZtJmNhdF9pZD0zJmNvbXBfaWQ9OA==.html

I already have a spare pump so the cost for me will be reduced quite a bit.

But this is a pretty good solution to a problem that most of us have. And its OEM!!

[daniel]

no stuttering, and no remap.:thumbs:

[shane@mbtech]

I had it when down to just over 1/4 tank, only seemed to get it coming out of sharp corner with slight incline.

Tried to leave half tank minimum and had no issues.

If others are suffering I reckon its poor baffle design.

[northernjim]

could it not just be the fuel pick up line in the tank having been dislodged??

might be worth looking at before buying a pot and extra pump:beer: