Hi,
I am after some information please,
if anybody is able to assist.
I am trying to find out what the
measurement /distance is
between the rear wheel hub flanges,
without the discs mounted, on a standard CSL.
I require this to be accurate please,
so tape measure needs to be nice and
straight.
This is Not the overall rear Track measurement, which
is usually measured from centre of wheel to
centre of wheel.
My car here is not standard, and although its stated
that a E46 M3 is the same, I am not so sure.
Anyways, if anybody has that information or
is doing work on the rear of their car which
requires both rear wheels to off at the same I
would very much appreciate it.
Note : measurement with discs still on would suffice
just so long as the disc bell thickness is known.
Many thanks in adavance.
Regards,
The Gorilla.
I am after some information please,
if anybody is able to assist.
I am trying to find out what the
measurement /distance is
between the rear wheel hub flanges,
without the discs mounted, on a standard CSL.
I require this to be accurate please,
so tape measure needs to be nice and
straight.
This is Not the overall rear Track measurement, which
is usually measured from centre of wheel to
centre of wheel.
My car here is not standard, and although its stated
that a E46 M3 is the same, I am not so sure.
Anyways, if anybody has that information or
is doing work on the rear of their car which
requires both rear wheels to off at the same I
would very much appreciate it.
Note : measurement with discs still on would suffice
just so long as the disc bell thickness is known.
Many thanks in adavance.
Regards,
The Gorilla.