Originally posted by Sid_E46
View Post
Announcement
Collapse
No announcement yet.
Sid's 2003.5 Silver Grey Speed Run
Collapse
X
-
Originally posted by Singh View Post
The car is coming along great man. I am attempting to dye the rear deck as well over the weekend and I am trying to locate the diy. Can you share some does and don’ts like how many coats did you apply, wait time between coats etc.?
Sent from my iPhone using Tapatalk
Leave a comment:
-
Originally posted by Sid_E46 View PostAttempting to redye the rear deck.
Sent from my iPhone using Tapatalk
- Likes 2
Leave a comment:
-
The first drive after all the work, need to tweak a few things and definitely needs an alignment.
- Likes 2
Leave a comment:
-
Avin head unit and HVAC relocation bracket in.
Had to extend the mirror heater wires so they would reach the plug points on the euro blind spot mirrors.
Leave a comment:
-
Finished installing the suede pillars and rear seats.
Took out the Eonon unit to replace with my previous Avin unit.
Buttoned up the trunk area too and threw in my previous basslink. Let's see if it survived the crash impact.
Leave a comment:
-
Went to the local BMW CCA meet today and saw some cool stuff.
A complete lineup of every M3 generation.
The guy with the Byzanz E36 M3 was also selling his vintage mini kit car collection and I managed to pick these up,
Once I got back home, I installed a suede headliner and the redyed deck.
Last edited by Sid_E46; 08-15-2021, 09:34 PM.
Leave a comment:
-
Originally posted by Tbonem3 View Post2.5" all the way with the dinan must be really tame. It was for me, and I had the louder stock sect 2 at the time (everything else the same)
I also, painstakingly, removed the black coating.
Can you get a video?
Leave a comment:
-
Swapped out the halogen lights with the bi-xenon from my CB and thew the amber corners on as well.
Finally took a drive around my neighborhood. Need to get emissions done next and then registration.
Gross, will be replacing soon.
Guess I'll never run out of extra bolts now.
Removed all the brittle OE sound deadening and replaced it with some kilmat.
Last edited by Sid_E46; 08-11-2021, 08:01 PM.
- Likes 2
Leave a comment:
-
First time in 4 weeks with all 4 wheels on.
Buttoned up 90% of the bottom end.
Got the Eventuri Intake and DMG strut bar in and started the car (after chasing a ground wire I didn't tighten all the way for 4 hours 🤦♂️).
Last edited by Sid_E46; 08-08-2021, 08:19 PM.
- Likes 1
Leave a comment:
Leave a comment: