MSx70 Flasher - Alpha

[MsRaZoRR]

I want to give a feedback on this flasher for MSV70 ECUs. Tried on my N52 engine with MSV70 ecu program version 921S software version 0GI1S HW reference 0049PP0 followed the first time use procedure but after i flash the RSA bypass with a full flash the ecu bricks itself reporting error DME Checksum

Update: Be careful when compiling the source I accidentally changed the encoding which resulted in partially different full read of the stock binary.

[TGInc]

I'm intently following this...
Absolutely phenomenal work by all involved.

[f2892704]

Thanks for sharing

[terra]

Should work with any cable that works with INPA

[MSSAddict]

terra
Do you need a specific cable like for the MSS6X for the MSS70??

[MSSAddict]

Here you go.

First 1536 KBs are the external flash. Last 512kb is internal flash. Partial would be 0x40000 - 0x5FFFF in the external flash

Thank you terra

[terra]

Here you go.

First 1536 KBs are the external flash. Last 512kb is internal flash. Partial would be 0x40000 - 0x5FFFF in the external flash

[MSSAddict]

Hi everyone,
thanks to terra for the software, always very good work

does anyone have a partial binary and fullbinary please i would like to take a closer look at this

[terra]

You're welcome

terra A bit OT, do you think it’s possible to use the cluster LED control code from MSS70 in MSV70 or MS45?

Yes it’s possible. Code actually is present in MSV70, just none of the values are populated. MS45 requires a little bit of program modding, but can be done (in fact I had done so ages ago when I had my zhp. I’ll have to dig up those binaries)

[sda2]

You're welcome

terra A bit OT, do you think its possible to use the cluster LED control code from MSS70 in MSV70 or MS45?

[Slideways]

I tried playing with that, but it was erroring out on me. I’ll have to work on it a little more

but I don’t think we need to work on the conversion since sda2 kindly linked his xdfs.

Nice!

Thank you sda2 for posting the link!

[terra]

Thanks!

Would this software work to convert the .a2l to .xdf? - https://github.com/bri3d/a2l2xdf

terra

I tried playing with that, but it was erroring out on me. I’ll have to work on it a little more

but I don’t think we need to work on the conversion since sda2 kindly linked his xdfs.

[Slideways]

Turns out I also had mentioned A2L for MSS70

https://www.ms4x.net/index.php?title...#Siemens_MSS70

Uploaded for both, full and partial binary.

Yes, there was a limitation in older Tuner Pro versions, prior to build 5.00.9816.

Thanks!

Would this software work to convert the .a2l to .xdf? - https://github.com/bri3d/a2l2xdf

terra

[sda2]

Turns out I also had mentioned A2L for MSS70

https://www.ms4x.net/index.php?title=Definition_Files#Siemens_MSS70

Uploaded for both, full and partial binary.

Yes, there was a limitation in older Tuner Pro versions, prior to build 5.00.9816.

[Slideways]

Nice work, as always! Incase someone needs an XDF for MSV70, I uploaded one for version 9PPL921S a while ago: https://www.ms4x.net/index.php?title...#Siemens_MSV70

Any chance you have the MSS70 XDF?

hassmaschine stated that "there is a bug in TunerPro that doesn't allow it to use more than 255 categories. MSS70 has almost 900 categories, which breaks TunerPro. Just sort it by "Parameter Type" or "Ordered List". I have something in mind to deal with this but I need to finish building my tools first."