Announcement
Collapse
No announcement yet.
Search Result
Collapse
33 results in 0.0081 seconds.
Keywords
Members
Tags
-
Vanos viton oring sizes
I’m looking for the viton oring size for vanos covers. It’s the 2 largest orings. One of seem to have ripped out of nowhere. I have a track day on...
-
Nextelbuddy, would you happen to have a picture? Also, my issue seems to be that the entire fan assembly was too thickLast edited by krashdumie05; 03-02-2023, 01:59 PM.
-
330 electric fan in an m3
I thought using a e46 electric puller fan was a drop in fitment. Was I wrong to think this? I can’t seem to get it to fit.
many help or confirmation...
-
OEM exhaust manifold header material
Anyone know what material the oem headers are made of? I’m going to cut out the cats out of the headers and weld in a straight section for a cheap set...
-
I pulled the fuse then cranked the engine a few times to burn off the residual. I would have expected the engine to die after a new seconds with no f...
Leave a comment:
-
Fuel pump fuse. Car still starts
I pulled the 20amp fuse for the fuel pump to perform a fuel filter change. However the car kept running.. It did run rough but did keep running for atleast...
-
Contacted a few places to see what they recomended.
Lang racing. H-STD
rogue engineering. HX-STD no concern with rpm
Morehead...
Leave a comment:
-
FYI. After speaking with acl they gave me some good information. They typically run the hx std on a stock unmachined crank
They said that...
Leave a comment:
-
Thanks for the help. Do you know where I can find the clearance specs?
Leave a comment:
-
Pn i got is 6B1569HX-STD. The .025mm or .001. was recomended by a shop that deals primarily with e46 m3s (they are a shop that people have head on the...
Leave a comment:
-
Thanks for the response. Can you explain why the extra clearance is not recomended?
BE bearing manufacture sells theirs with additional...
Leave a comment:
-
ACl Rod bearing question
I just received a set of acl rod bearings with .25mm extra clearance. I know that the oem and vac bearings are specific to rod and cap side
...
Leave a comment: