Announcement
Collapse
No announcement yet.
Search Result
Collapse
173 results in 0.0911 seconds.
Keywords
Members
Tags
-
I think I did my headers mostly from below with the reinforcement plate removed, but it would be even easier without the subframe there. There is a coolant...
- Likes 1
-
An unresonated section 2 would IMO be louder, but as someone else says, I think section 3 makes the biggest difference to overall sound volume.
...
Leave a comment:
-
Starter isn't that horrible, with a 3/8ths ratchet with a swivel head you can break the bolts loose, after that a 10mm on a 1/4 ratchet to more easily...
- Likes 1
Leave a comment:
-
The stock seats won't hold you in better with a reupholster, sure your body won't slide as easily as on the leather but your body will still move around....
Leave a comment:
-
Does anyone know if the OEM fuel pump assembly has an integrated one way valve? To me the starting issue too sounds a lot like fuel issue. Have you tried...
- Likes 1
Leave a comment:
-
Worth having a look at getting new cam sensors?
Regards
- Likes 1
Leave a comment:
-
Weird indeed, Apparently the XTA have the same internals that the KW V2 does. Regardless I didn't find my XTA's too horrible, certainly firm, even on...
Leave a comment:
-
I thought that pin was slightly cone shaped and would only go in/out 1 way? But I do remember shortening a very small screw and taping it to the mouth...
Leave a comment:
-
After putting airbox and cams on my car, it always fluctuated at idle. Hassan finally tuned this out, stating that when temps increase the fuelling wasn't...
Leave a comment:
-
Holiday season so I doubt you'd get any reply there now until mid-august perhaps, maybe start of august depending on what holiday rotation they do.....
Leave a comment:
-
I thought there were 2 different sizes for the boots and you'd have to make sure to get the right size or am I remembering this incorrectly? I think the...
Leave a comment:
Leave a comment: