Announcement
Collapse
No announcement yet.
Search Result
Collapse
17 results in 0.0055 seconds.
Keywords
Members
Tags
-
Hi thanks for the responses, I'll check ECUworx again, I believe I have that tool as well. The 8200 limit I believe has been surpassed once or twice (no...
-
CSL tune - no rev limiter
Hello, I have an S54 that I flashed the CSL tune to. I am using an airbox with the Kassel MAP sensor, and an IAT sensor. My DME is an MSS54HP. I used...Last edited by Joshb556; 06-04-2022, 09:26 PM.
-
Hi R3Z3N, I remember seeing EKP MODULE printed on the "relay". Do you think that could be it?
The adapter harness + documentation...Last edited by Joshb556; 06-29-2021, 02:02 PM.
Leave a comment:
-
Its real I picked one up last summer (I think it was the second batch or something). The quality doesn't seem poor at all, but I haven't used it yet since...
Leave a comment:
-
I was able to drill out the sheared pin (the metal was significantly softer than the crank). So I cut a roll pin down and put it in there while I was...
Leave a comment:
-
96 M3 5spd. Preparing S54 to swap in. CSL style airbox, OEM catless headers 3inch BW exhaust, VAC/ATI dampener, Euro E36 M3 style overflow...Last edited by Joshb556; 03-08-2021, 11:04 AM.
- Likes 2
Leave a comment:
-
Glad to hear I am not alone. I spoke with Raj about this... He basically said this just happens to some engines, no one knows why. He said that what...
Leave a comment:
-
S54 Vanos post Beisan/DV Rebuild Timing Issue
Hello, I did the vanos rebuild using Beisan seals, oil pump disc (New one with 2 holes), chain guides, BMW S62 hub diaphrams etc..., and I got DRVanos...Last edited by Joshb556; 03-07-2021, 12:15 PM.
-
Great to hear. I figured as much. The metal used is very very soft. Thanks for the response!
- Likes 1
Leave a comment:
-
-
Harmonic Damper Locater Pin on Crankshaft Broken
I took off the harmonic damper from my S54 and it took a piece of the locater pin with it. My engine is a 2002 with the 4 bolts holding the damper on....
Leave a comment: