Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.1478 seconds.
Keywords
Members
Tags
-
I had to replace the GS6-37 because of an engine failure taking out the bellhousing, it was excellent! It was also a BMW reman. Hard to say how a used...
-
I think you'd be fine using a Schroth quick fit. It is designed to work with the OE system and prevent submarining. You do run the risk of being held...
Leave a comment:
-
FS: Front Control Arms - NEW - Genuine BMW
A pair of front control arms for sale. Brand new, genuine BMW.
$550 shipped for the pair.
...
-
26117542264
Fill up the boot and CV with grease and then slide the CV joint on. A whole bunch will come out. Its gonna be messy.
Leave a comment:
-
Stock corner weights aren't the same so the adjuster height will be slightly different. Normal.
If you get the car level and then put it...
Leave a comment:
-
I'm thinking the belleville spring dulls the locking effect. Wheel spin engages the pump and presses the clutch stack. A thicker, heavier spring would...
Leave a comment:
-
I run a stock bar with no rear bar. I am at 52/48 weight distribution, no rear bar helps with putting the power down. With a ZF 4 clutch LSD the rear...
Leave a comment:
-
Don’t know. I have to wonder if the thicker Belleville spring is not allowing the shear pump to work properly? Total guess....
Leave a comment:
-
You will get more whine as the gear ratio gets shorter. Not an expert but it has something to do with the frequency caused by the gear meshing with a...
- Likes 1
Leave a comment:
-
I've tried removing the PS and haven't found a good solution....
Leave a comment:
-
The ass kicker is making the mold…even worse when it’s 3 pieces. I could probably made my hood mold in a fraction of the time than what the time it...
- Likes 1
Leave a comment:
-
If you measure carrier preload you have to adjust for the gear ratio. If you swap the LSD unit, likely won’t need a carrier shim adjustment. Of course,...
Leave a comment:
-
Another oil thread?...lol
I use OE 10w-60 and a Mahle or Mann filter...whatever is cheaper.
I've been considering using Ravenoil...
- Likes 1
Leave a comment:
-
The V2 is a pain in the ass. There is some adjustability in how much you turn the top plate. So you might have to test it, remove the LSD to make adjustment,...
- Likes 1
Leave a comment:
-
I think that's a korean thing. I know my arms are shorter than most 5'10' people. Not t-rex short...but noticeable as I get older and have to bend over...
- Likes 1
Leave a comment:
Leave a comment: