Announcement
Collapse
No announcement yet.
Search Result
Collapse
96 results in 0.0887 seconds.
Keywords
Members
Tags
-
These are now sold.
-
There are a few in the thread below. This was before I put KW V3s on, so it's still standard height:
https://www.zpost.com/forums/showth...
Leave a comment:
-
Advan RS-DF - 18in - Perth Australia
Advan RS-DF wheels in Machining and Racing Hyper Black colour.
5 x 120 PCD with 72.6mm centre bore.
18 x 8.5 +35 (two wheels) and 18...Last edited by ///MBan; 07-29-2023, 06:33 PM.
-
I'm not sure if this is an issue for the E46 guys, but Z4M users have found that the factory rubber intake elbow slips off the opening to the plenum....
- Likes 3
Leave a comment:
-
I'm not sure if this is an issue for the E46 guys, but Z4M users have found that the factory rubber intake elbow slips off the opening to the plenum....
- Likes 4
Leave a comment:
-
I weighed mine and it is about 8Lb lighter than the stock plenum. The Eventuri is another 2Lb lighter than the standard air filter housing, so 10Lb all...
Leave a comment:
-
I got my Karbonius plenum installed yesterday but didn't get a chance to have a proper drive until today.
Notes on the installation:
...
- Likes 2
Leave a comment:
-
I got my Karbonius plenum installed yesterday but didn't get a chance to have a proper drive until today.
Notes on the installation:
...
- Likes 2
Leave a comment:
-
How have you gone with the installation? Did you have any trouble getting the plastic elbow to seat properly onto the airbox entry? A zpost user had to...
Leave a comment:
-
A zpost member already has his installed and with an Eventuri as well he says it's pretty much the same as the full CSL box (see the link I posted above)....
Leave a comment:
-
I'll be doing this when I get mine fitted. I just found out I need to order the CSL crankcase hose... hopefully that arrives before next weekend!...
Leave a comment:
-
A zpost member has installed their Karbonius plenum - see post 238 in the thread below for impressions and installation notes:
https://w...
Leave a comment:
-
A zpost member has installed their Karbonius plenum - see post 238 in the thread below for impressions and installation notes:
https://w...
Leave a comment:
-
The missing part is on its way. If it travels as fast as the plenum did, I should have it mid-next week and install next weekend.
There is...
Leave a comment:
-
It looks pretty similar, but you'd need to get them side by side to check. By the way, the two pieces are bonded together on the new plenum, so you can't...
Leave a comment:
Leave a comment: