Has anyone tuned or increased the dwell time when going to e85/boost?
For background:
I had an occasional misfire on cyl 6 usually...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
13 results in 0.0059 seconds.
Keywords
Members
Tags
-
Tuning Ignition Dwell time on E85 + Boost
-
Fixed ! Here is what I did and discovered.
Step 1 - Took a step back and applied some advice from this thread.
1. Restored...
- Likes 1
-
Hi Martyn, I have the boost running on wastegate spring pressure so far. It's only around 2-3 psi. With that boost, when I can get a full-throttle run,...
Leave a comment:
-
Attached are the MAF transfer, Load Base, and Torque map I'm using.
As you can see I've updated the Load axis to go up to 3, and the MAF...3 Photos
Leave a comment:
-
Thanks for the color. I’ll remove the o2s from the car and restore the low fuel dtc and report back.
Sent from my iPhone using...
Leave a comment:
-
MAF - pmas hpx
The only dtc that was thrown was the low fuel cat protection code.
I have cat protection disabled via setting...
Leave a comment:
-
Turbo boost and MSS54 torque and load managers
Hi all, I'm in the middle of tuning my e46 m3 turbo's DME to run under boost.
I seem to keep tripping the emergency program for some reason....Last edited by rmz001; 06-18-2022, 10:42 AM.
-
Converting my M3 turbo from HPF/AEMv1 to OEM DME (some progress!)
Hi all, figured I'd start my thread since I've made progress with my conversion, and had a few questions to see what everyone thinks.
Background...Last edited by rmz001; 04-18-2022, 07:11 PM.
- Likes 3
Leave a comment: