Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.1320 seconds.
Keywords
Members
Tags
-
Yes it would have failed had they checked your CVN so it appears shops are still not checking our cars and hopefully never will. I've seen threads on...
- Likes 1
-
-
The CVN is a value provided by the manufacturers. Every time your tuner or any third party software changes your cars tune the CVN changes. This is unavoidable....
- Likes 1
Leave a comment:
-
That's a good data point because they should have data on a Focus RS (although they had a fairly limited run). I've always wondered if they were actually...
- Likes 1
Leave a comment:
-
This is definitely a tough one to evaluate. Has to go to the right person because personally I wouldn't buy a pre-LCI coupe (and others feel this way,...
- Likes 3
Leave a comment:
-
Diffsonline, like everything else, has gone up a bunch. My 3.91 in 2020 was 2500 (not including core charge) and is now 3200. This is one of those items...
- Likes 1
Leave a comment:
-
They have supposedly been doing this since 2021 but I haven't heard of anyone from this forum getting flagged for an aftermarket tune. Perhaps they don't...
Leave a comment:
-
-
What was the condition of the clutch fork? Going steel on the pivot maybe broke it? I’ve seen a few other error 59s come down to a broken fork. Anyways...
- Likes 1
Leave a comment:
-
Front is perfect.
Rear would need a 15mm spacer if looking for flush....
Leave a comment:
-
What is a little unlikely, but happening, is that another member is having the exact same issue after clutch/PP replacement https://nam3forum.com/for...Last edited by oceansize; 04-04-2024, 11:02 AM.
Leave a comment:
-
No wiring harnesses to inspect other than the obvious ones.
Good non-smg video to watch, just as refererence.
https://www.youtube....Last edited by oceansize; 04-04-2024, 05:18 AM.
- Likes 1
Leave a comment:
-
At this point I can't help but feel something in the clutch installation has gone awry. You are far from the only one to hit this issue (repeated 59...
- Likes 1
Leave a comment:
-
Don't press in the rod too hard (just slight pressure to make sure it doesn't move/wobble, but really it is easy to tell because new the rod is self-centered),...Last edited by oceansize; 03-29-2024, 07:47 AM.
- Likes 1
Leave a comment:
-
When taking apart your headlight the large interior black plastic trim piece that wraps around the bulbs and bulb wells can be very fragile along the...
Leave a comment:
Leave a comment: