Finally got a link to some pics: https://photos.app.goo.gl/SgcFL8q5vScSpK3j7
Hopefully it works for everyone.
I am going to see if I can post his info here. He may be willing to part now.
A friend of mine is getting out of tracking to travel the country in an RV. I know I know I told him an RV would tow his track car nicely and he could visit a lot of tracks but that’s not in the cards. I know this guy very well, he’s an engineer, and he has done meticulous upgrades and maintenance on this car. He is absolutely not looking to part anything out at this time. He just wants to sell it all as a package. Basically all you need to do is show up with a truck and tow it away as the trailer is even included. P.m. me and I can provide contact info.
$37,000 for everything listed.
2005 BMW M3 Track car (SMG)
Carbon Black
60000 miles
Parts on the car:
PFC E46 M3/MZ4 Rear Z29 Brake Kit 321MM
PFC E46 M3/MZ4 Front Z45 355MM – Black
M12x1.5 75mm BimmerWorld Wheel Stud/Black Nut Package
Radiator, CSF Triple-Pass Aluminum - E46 M3
SPAL 16" Low Profile Fan and 185 degree harness kit
BimmerWorld E46 M3 Rear Diffuser
BimmerWorld E46 M3 Race Exhaust Kit by MagnaFlow - Straight Pipe Diffuser Exit
E46 M3 Aluminum Expansion Tank by Moroso
aFe Magnum Force Intake Kit - E46 M3
BE-Clevite Rod Bearing Set - E46 M3, MZ3 S54, Z4M installed 2020
ARP Rod Bolt Kit - S54 (02/2003+ Build, M10 Size Bolt)Installed in 2020
Completer Vanos rebuild with Cryo exhaust hub in 2020
E46 M3 Carbon Fiber Roof
BimmerWorld Solid Engine and Transmission Mount Set, Lower Height - E36, E46, Z3, Z4
Turner FCAB Radial Bearings
Turner solid rear subframe bushings
Turner front and rear sway bars.
Adjustable Swaybar End Links front and rear
Rear Shock Mounts (RSM), BimmerWorld - E30, E36, E46, Z3, Z4 (12mm Shaft)
Ground Control Rear Spring Alignment Perches
Ground Control Rear Articulating Spring Perches - E46
Ground Control Front Race Camber/Caster Plates - E46
MCS 1 way coil-over Damper set with Hyperco springs 700lbs Front and 800lbs Rear spring rates
Powder coated front and rear subframe and various other parts under the car
New fuel lines
Radium fuel filter and regulator
Radium fuel pump conversion for Walbro pump
Radium fuel rail (not installed)
Oil catch can
New power steering pump and custom power steering lines and cooler (does not leak)
Sparco QRT-R seats with Bimmer world base plate
Safe Craft Harnesses with one free recertification available
Custom roll bar powder coated silver
Mason Engineering rear strut brace with subframe support
Turner pedals
Solo DL mounted
Wheels and tires:
Apex EC-7 – Square with Hancook Ventus C70
Apex Arc-8 Staggered with NT01
VMR801 staggered with Hoosier H2O rain tires
M3 CSL original wheels with Michelin street tires
Tools:
Tanner scales (wired)
BG Racing String alignment kit
Camber caster gage and 3 point support
S54 Timing tool kit
Koch KT20252 spring compressor kit (suspension)
ARP Bolt stretch gage (rod bolts)
Spare parts:
All of the parts removed from the car, including complete interior (the seats are in top condition) the original exhaust, original brakes in top condition.
There is a ton of new and used spare parts that I don’t intend to inventory or list you will get every part I have. Including two full sets of Brake pads for the PFC brakes. Enough Redline fluids for at least a year of operation.
Trailer:
Rice 7K Trailer with custom tire rack and storage.
Tie-down straps (MACS)
Hopefully it works for everyone.
I am going to see if I can post his info here. He may be willing to part now.
A friend of mine is getting out of tracking to travel the country in an RV. I know I know I told him an RV would tow his track car nicely and he could visit a lot of tracks but that’s not in the cards. I know this guy very well, he’s an engineer, and he has done meticulous upgrades and maintenance on this car. He is absolutely not looking to part anything out at this time. He just wants to sell it all as a package. Basically all you need to do is show up with a truck and tow it away as the trailer is even included. P.m. me and I can provide contact info.
$37,000 for everything listed.
2005 BMW M3 Track car (SMG)
Carbon Black
60000 miles
Parts on the car:
PFC E46 M3/MZ4 Rear Z29 Brake Kit 321MM
PFC E46 M3/MZ4 Front Z45 355MM – Black
M12x1.5 75mm BimmerWorld Wheel Stud/Black Nut Package
Radiator, CSF Triple-Pass Aluminum - E46 M3
SPAL 16" Low Profile Fan and 185 degree harness kit
BimmerWorld E46 M3 Rear Diffuser
BimmerWorld E46 M3 Race Exhaust Kit by MagnaFlow - Straight Pipe Diffuser Exit
E46 M3 Aluminum Expansion Tank by Moroso
aFe Magnum Force Intake Kit - E46 M3
BE-Clevite Rod Bearing Set - E46 M3, MZ3 S54, Z4M installed 2020
ARP Rod Bolt Kit - S54 (02/2003+ Build, M10 Size Bolt)Installed in 2020
Completer Vanos rebuild with Cryo exhaust hub in 2020
E46 M3 Carbon Fiber Roof
BimmerWorld Solid Engine and Transmission Mount Set, Lower Height - E36, E46, Z3, Z4
Turner FCAB Radial Bearings
Turner solid rear subframe bushings
Turner front and rear sway bars.
Adjustable Swaybar End Links front and rear
Rear Shock Mounts (RSM), BimmerWorld - E30, E36, E46, Z3, Z4 (12mm Shaft)
Ground Control Rear Spring Alignment Perches
Ground Control Rear Articulating Spring Perches - E46
Ground Control Front Race Camber/Caster Plates - E46
MCS 1 way coil-over Damper set with Hyperco springs 700lbs Front and 800lbs Rear spring rates
Powder coated front and rear subframe and various other parts under the car
New fuel lines
Radium fuel filter and regulator
Radium fuel pump conversion for Walbro pump
Radium fuel rail (not installed)
Oil catch can
New power steering pump and custom power steering lines and cooler (does not leak)
Sparco QRT-R seats with Bimmer world base plate
Safe Craft Harnesses with one free recertification available
Custom roll bar powder coated silver
Mason Engineering rear strut brace with subframe support
Turner pedals
Solo DL mounted
Wheels and tires:
Apex EC-7 – Square with Hancook Ventus C70
Apex Arc-8 Staggered with NT01
VMR801 staggered with Hoosier H2O rain tires
M3 CSL original wheels with Michelin street tires
Tools:
Tanner scales (wired)
BG Racing String alignment kit
Camber caster gage and 3 point support
S54 Timing tool kit
Koch KT20252 spring compressor kit (suspension)
ARP Bolt stretch gage (rod bolts)
Spare parts:
All of the parts removed from the car, including complete interior (the seats are in top condition) the original exhaust, original brakes in top condition.
There is a ton of new and used spare parts that I don’t intend to inventory or list you will get every part I have. Including two full sets of Brake pads for the PFC brakes. Enough Redline fluids for at least a year of operation.
Trailer:
Rice 7K Trailer with custom tire rack and storage.
Tie-down straps (MACS)
Comment