anyone running Cup's yet?

[AlexGTT]

Alex, how come you're only getting half the mileage out of the fronts (versus the rears)?

I'd say 6,000-7,000 out of rears if you really try hard, but more out of the fronts.
It was the rears that always cost me. One set was 1500 miles but it did include a LOT of road drifting.

I was expecting that as well but I find trackdays are wearing the fronts faster. Normal road driving wear seems much more even wear, front to rear but as soon as I hit a track, especially tracks with a seriously long, fast corner with high entry speeds like Mallory (1st corner), Snetterton (long right before chicane), Spa (double left hand down hill) the fronts get hammered. Probably got a lot to do with driving style. I've always tended to lean very heavily on the fronts on the way into corners keeping everything very much in line on the way out on the power.

That seems to be backed up by my tyre wear patterns. I had problems wearing the outside edges of my fronts quicker than the inside, even with nearly 2 deg negative camber. I now run 2.5 for track and get almost perfect even wear across the fronts.

Last October, I arrived at Snetterton with absolutely mullered fronts. They'd gone on the same time as the rears which were maybe just 2/3rds worn. I had new fronts that morning and I've only just changed the rears in the last week after a Ring trip, in November and Oulton Park trackday, in November.

My conclusion is that I don't get anywhere near enough tail out exiting corners. Something inside me knows it's slower and won't let me do it. I think I must be :gayfight: :hahaha:

[SpineOnABap]

Right! Sorry I thought you were talking 'road', rather than track.
That extra camber is needed on track. In the early days (I'm talking '03) a few of us got through a few sets of fronts finding that out! :-D

[dave1]

Been swapping tyres today you would't beleive how stiff the side wall's are on cup's compared with ps2's

[SpineOnABap]

Yeah they're made of iron!

You don't wanna watch the fitters doing it ... :bigcry:

[bryce]

Thats better milage than I thought then :notworthy:

A set should last me all year :gayfight:

[jibm]

anyone tried filling them with nitrogen?

[AlexGTT]

Been swapping tyres today you would't beleive how stiff the side wall's are on cup's compared with ps2's

Aren't they just! I also change my own on our tyre machine with the help of one of the lads and a large 'G' clamp to curl the sidewalls onto the rims. I take about 1/4 hour on each wheel just to keep those rims perfect. :gayfight: :whistle: :wink:

[AlexGTT]

anyone tried filling them with nitrogen?

No but good call. Would be far more stable with the temps they generate.

[bryce]

Im filling mine with helium, otherwise its against all ethics of the CSL.

[karbonkid]

How long do cups last on average, mileage compared to PS2s?

[DazBlackCSL]

Not long if your tracking hard , 4/5 track days .. 6000 miles on the road if your lucky and not tracking ??

Mine arrive next week , as the old ones are very bad !! prob good for a track day

[SMD]

How much did you pay for the new cups Daz? :whistle:

[DazBlackCSL]

Done a deal ... :whistle:

[SMD]

:whistle:

[jibm]

Done a deal ... :whistle:

me too :-D