CSLReg Display Plates

[karbonkid]

Right Chaps...I had been toying with the idea of creating a display plate for Track/ Static display use for some time and thanks to Steve aka 'Phat///M3' who has been helping me with all the require artwork, we have managed to come up with a final image that has now been forwarded to the printers.

I now need to know an idea on possible numbers who may be interested in a set, to generate a better idea on what cost will be per set. Please add your name below or PM if preferred, to show your interest. :thumbs:

Below is a mock up of the plate:



Any questions - drop em below/ PM me.

[DuncanR]

Looks good the pair of you, and there is just enough space at the ends to put some initials so that Im fully aware of who im about to pass ! All those SG motors at Spa confused me somewhat as didnt know who was who !

Put me down for a set KK, as I shall be converting my new plate to a velcro type TD rip off one !:smokin:

[karbonkid]

Heres a quick illustration to what they should look like (to give you more idea), sorry Dunc for no SB examples. :bigcry:





Add your name below if interested:

1. KarbonK
2. DuncanR
3.

[SachaR]

Add your name below if interested:

1. KarbonK
2. DuncanR
3.SachaR
4.

[DuncanR]

sorry Dunc for no SB examples. :bigcry:


1. DuncanR
2. KarbonK
3.

nO WORRIES kk ALL SORTED, i HAVE ALSO AMENDED THE LIST IN ORDER OF PRIORITY !! ...AH BOLLOCKS AGAIN

[phat///M3]

Hope everyone likes it, I do want to praise/give credit to Adam (aka CSLCup) as he was kind enough to send me a file with the CSL lettering they use on the CSL Cup and it also had the red register letters in there which I decided to use in the end aswell.

[scrubberamit]

1. KarbonK
2. DuncanR
3.SachaR
4.ScrubberAmit

[flatout]

1.[/B] KarbonK
2. DuncanR
3.SachaR
4.ScrubberAmit
5. Flatout

[DuncanR]

List is getting longer !

1. DuncanR
2. KarbonKid
3.SachaR
4.ScrubberAmit
5. Flatout

[mattCSLnut]

Looks good Alex and I'm in but can the whole logo be enlarged a touch more to fill the space, as there's too much emptiness around it at the moment :whistle:

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut

[Roland]

looking good!

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland

[karbonkid]

Ahh.. numbers Rising!

@matt - we did try enlarging the image and has being enlarged slightly from the original now. We initially thought the image may be better kept smaller (like shown) as it appears a little more subtle and classy. But this is open to all suggestions and wiling to try before you buy. So will ask Steve to enlarge a little (if he hasn't had enough of me already) and I will post up another illustration.

[mattCSLnut]

Ahh.. numbers Rising!

@matt - we did try enlarging the image and has being enlarged slightly from the original now. We initially thought the image may be better kept smaller (like shown) as it appears a little more subtle and classy. But this is open to all suggestions and wiling to try before you buy. So will ask Steve to enlarge a little (if he hasn't had enough of me already) and I will post up another illustration.

I appreciate that For sure, I'm all for classy & subtle but the overall smallness of the logo was the first thing that caught my extra sensitive eye:gayfight:
I look forward to the revised illustration :thumbs:

[karbonkid]

Update - Price:

The List

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8.
9.
10.

I have had a price back from the printers based on 10 or more being purchased, it will be as follows:

£18.50 /pair, inc UK delivery.

[Yanto_csl]

nice idea, KK - go on then...

1. DuncanR
2. KarbonKid
3. SachaR
4. ScrubberAmit
5. Flatout
6. mattCSLnut
7. Roland
8. Yanto
9.
10.