Help Needed Please - Cracked Bumper

[Mr_Tickle]

Hi all,

Looking for some of your expert advice please. This morning whilst edging out of a junction, a van refused to let me out and cut straight across the front of my bumper. Resulting damage is it scraped right-hand corner, ripped the no. plate off, and detached the right-front spliter a bit (but not broken). See photos attached.

I'm not sure the best way to go about getting it repaired. If I go through the insurance then god knows what my premium will be next year, but I know that the bumper is an expensive bit of kit so I may have no choice.

What do you guys think? Simple to repair? If so who would you recommend (I live South London but will travel)? Or will I need to get the insurance to replace the whole lot.

Thanks in advance for any help you can give. Needless to say I am truely gutted!

[Mark CSL]

Easy fix £100 to fix and paint the bumper and if you pm me your address i have a brand new number plate holder you can have :thumbs:
Not sure when you might get it with the post the way it is just now :hahaha:

[glendog74]

I take it the van didn't stop then? :banghead:

If its just cosmetic damage and the structure is ok then i would agree with Mark and just get the paint sorted. The splitter is easy to re-attach with new plastic rivets.

Looking at the 3rd pic, at least you know you have a CF bumper! :thumbs:

[Mr_Tickle]

Thanks for the replies guys! PM coming your way Mark regarding the plate holder, cheers! :thumbs:
Damage on the corner is cosmetic only, but where the screws holding on the no plate where pulled out the holes have been enlarged and there is a crack with one of them. I'm guessing this will require a bit more than paint? In photo crack is about 2" long (after that is cosmetic only), and little hole approx 1". Can anyone recommend where I can take this to get fixed? Thanks again in advance.

[outnumbered]

Specialised Paintwork in Reading have certainly fixed a few.

[Mark CSL]

Thanks for the replies guys! PM coming your way Mark regarding the plate holder, cheers! :thumbs:
Damage on the corner is cosmetic only, but where the screws holding on the no plate where pulled out the holes have been enlarged and there is a crack with one of them. I'm guessing this will require a bit more than paint? In photo crack is about 2" long (after that is cosmetic only), and little hole approx 1". Can anyone recommend where I can take this to get fixed? Thanks again in advance.

The number plate holder will hide the crack and with some catty and a paint it will look like new :thumbs:

Pm sent :beer:

[andye30m3]

Can anyone recommend where I can take this to get fixed? Thanks again in advance.

If you don't mind traveling to sussex you could try this place http://www.sprcoachworks.co.uk they've done a few carbon repairs on a couple of GT3 race cars

[davytombstone]

i,d have the holes filled and leave the holder off for a cleaner smoother look.

[Mark CSL]

Part will be in the post on monday Jamie

[Sailorbaz]

As has been said before, it'll fix easily enough. Search the Forum to see the job me and my Dad done on mine a couple of years ago and it's still spotless.

My link