Roll bar bush kits

[mattCSLnut]

come on then, get them posted

Ohh OK, since you've asked so nicely Steve :hahaha:
p.s. ignore the blanked out bit (wrong set of rears supplied by ECP) :banghead:

[s.mac]

that really helps a NUMB NUT like me, FoOKinG close up ...

I have a noise at the back and cant find it anywhere, not suspension, not callipers, not rtabs, not exhaust...
a bit of movement in the camber arms and now you've mentioned roll bar noise due to wear it could be that, not loud but something somewhere, are the roll bars that tie the back end and eibach and others do ?? and should camber arms move a bit ?

[s.mac]

and what are the rods in the 1st pic? are they new or have you just put polly bushes in them ??

[shane@mbtech]

Steve, drive across next sat morning, im in work, ill drive it then I will get it on ramps and give it full check over. I will 100% find it. :thumbs:

The dealers are shit at finding stuff like this.

Your only an hr from us.

[Bounce]

that really helps a NUMB NUT like me, FoOKinG close up ...

I have a noise at the back and cant find it anywhere, not suspension, not callipers, not rtabs, not exhaust...
a bit of movement in the camber arms and now you've mentioned roll bar noise due to wear it could be that, not loud but something somewhere, are the roll bars that tie the back end and eibach and others do ?? and should camber arms move a bit ?

Your not driving it enough mate:bigcry:

[shane@mbtech]

Plus I will show you how to carry out some basic checks. :thumbs:

[Bounce]

Plus I will show you how to carry out some basic checks. :thumbs:

You'll be there a while.:hahaha:

[s.mac]

Your not driving it enough mate:bigcry:

I know :banghead:

Steve, drive across next sat morning, im in work, ill drive it then I will get it on ramps and give it full check over. I will 100% find it. :thumbs:

nice one mate :thumbs:

Plus I will show you how to carry out some basic checks. :thumbs:

they will need to be proper basic :whistle:

[Bounce]

I know :banghead:



nice one mate :thumbs:



they will need to be proper basic :whistle:

:hahaha::hahaha:

[CraigMillwardCroft]

Went to my local ECP (Loudwater) gave them the numbers but they knew nothing about them, they had all the drop links though, does anybody know where I can get hold of them and which ECP ? :banghead:

[mattCSLnut]

Went to my local ECP (Loudwater) gave them the numbers but they knew nothing about them, they had all the drop links though, does anybody know where I can get hold of them and which ECP ? :banghead:

Give Shane or Guy a call @ ECP Cambridge: 01223 401401 :thumbs:

Front bushes ECP part number: 973 11 1001 (30.8 mm) ... rear bushes ECP part number: 973 11 0721 (21.5 mm) ... failing that, the chap on fleeBay has a very good deal on a complete set of these, linky here: http://www.ebay.co.uk/itm/POWERFLEX-...#ht_2143wt_907

Good luck with it :beer: