okay, long story short - this is a top mount stud that came off the KW Competition kit - it was stripped by a faulty torque wrench and I've searched high and low to try and find a replacement locally here in NZ (I have seriously called and emailed EVERY SINGLE shop and supplier in NZ that might stock something like this and NOBODY, absolutely NOBODY has one - it's like a one off item).
I've emailed KW but they've not being particularly helpful with their payment method (wire transfer only) - so by the time I did all that this pesky bolt would have costed me over 25 euros .... fxck that ...
I've also emailed KW UK and a local KW dealer in NZ and Australia and no one has responded to me or have been able to help.
Can a member on here with access to high tensile strength fastener help out (or better still someone that lives near KW UK directly and see if they have one in stock) - I only need bloody one (what a nuisance).
Pics of the offending item - it's an M8 35mm 10.9 high tensile stud made by Tigges
I've emailed KW but they've not being particularly helpful with their payment method (wire transfer only) - so by the time I did all that this pesky bolt would have costed me over 25 euros .... fxck that ...
I've also emailed KW UK and a local KW dealer in NZ and Australia and no one has responded to me or have been able to help.
Can a member on here with access to high tensile strength fastener help out (or better still someone that lives near KW UK directly and see if they have one in stock) - I only need bloody one (what a nuisance).
Pics of the offending item - it's an M8 35mm 10.9 high tensile stud made by Tigges
Comment