Front splitters paint..

[phoenixcsl]

I can get them done if any one wants ?
I can get a price + postage.
I can also cover them in 3m clear film makes them last :supz:

I'm interested in a price too please :thumbs:

[M5 Powered]

Place in Solihull did mine for 90 quid and they still look like new. They can also repair the roof properly too if required.

BTW, in my experience, don't bother putting film on them. The minute you get a decent stone hitting the carbon, the film punctures and retains any water / moisture and they look 100% worse.

:thumbs:

[EVLXGE]

Place in Solihull did mine for 90 quid and they still look like new. They can also repair the roof properly too if required.

BTW, in my experience, don't bother putting film on them. The minute you get a decent stone hitting the carbon, the film punctures and retains any water / moisture and they look 100% worse.

:thumbs:

Do you have the details of the place in Solihull? I have a small stone chip to the roof I could do with a look over.

[billyboysm3]

Do you have the details of the place in Solihull? I have a small stone chip to the roof I could do with a look over.

x1

[billyboysm3]

For the companies details not the chip in rooooof.

[Mark CSL]

I can get them done for £80 a pair inc postage if any one needs them done :thumbs:
Not got a price on the film just yet :whistle:

[shimmy]

A proper venture shield film will not hole.......



My refub wasn't very good......:whistle:

[Wallachie]

I have a set of OEM splitters if anyone is interested.

Apparently BMW are charging £350 each these days, what a total rip off.

[Bounce]

I have a set of OEM splitters if anyone is interested.

Apparently BMW are charging £350 each these days, what a total rip off.

And yours are £349.:hahaha:

[Wallachie]

And yours are £349.:hahaha:

I think I could do a better deal than that! :blalalala:

[E46CSL]

I have a set of OEM splitters if anyone is interested.

Apparently BMW are charging £350 each these days, what a total rip off.

& your price is?

[bryce]

Has anyone used the lads that mark mentioned?

[billyboysm3]

Im up for getting these done still.

[Wallachie]

& your price is?

No idea what they're worth second hand, so I fired them on eBay for now.

If anyone wants them, send me a PM.

[mattCSLnut]

Im up for getting these done still.

Mine need doing as well :bigcry: