Originally posted by rstoughy
View Post
Announcement
Collapse
No announcement yet.
CSL smarten up plans
Collapse
X
-
Cor I've got loads to do to keep mine nice and tidy over the winter, plus I need to clear the garage from all the bits i'm accumulating!
Fit my Nitron Coilovers, 12mm Spacers, RTAB's, Poly ARB Bushes, Performance Friction Pads, Pollen & Air Filters...oh need a Steering Wheel Re-Trim and a Wheel Refurb in OEM finish whilst she's in bits...
Roll on the Spring :smt055
Comment
-
Ok, well now I have revised my plans......due to AlexGTTs OCD post
1. Clean the car :smokin:
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.
:bigcry:
Comment
-
Not even PF's on front ?Originally posted by shimmy View PostOk, well now I have revised my plans......due to AlexGTTs OCD post
1. Clean the car :smokin:
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.
:bigcry:
Comment
-
Stripped out the rear centre console using a guide on here, it just hooks onto the rear seat basically, poor design, but very light weight I suppose.Originally posted by shimmy View Posti need to do rear centre seat black, how did you do it?
Removed the 3 alacantara pads, rubbed down and primed with this, I used the black version, not the grey primer IIRC
http://www.google.co.uk/products/cat...d=0CIABEPMCMAI#
Then from the same manufacture sprayed matt black with
Was thinking about doing the plastics on the rear seat uprights too, but I think the plastic section cant be separated from the alacantara parts.
It's been doen about 6 months and still looks good, seems to be hardwaring and doesn't scratch or flake off. Very happy with it and would do it again
I bought all the stuff from B & Q
Comment
-
:hahaha: I knew you'd give it up in the end. I'm first with Intrax rebuild.Originally posted by shimmy View PostOk, well now I have revised my plans......due to AlexGTTs OCD post
1. Clean the car :smokin:
2. Refurb APs inc nipples, seals, paint
3. New AP anti rattle clips and tubes
4. New brake discs all round (AP)
5. New RS 29 pads all round
6. Remove rear Intrax and refurbish/re-gas
7. Repainted oem rims silver
8. New PSS all round
9. NEw Cups all round
10. Refurb front splitters
11. Recover steering wheel
12. Wrap if I can afford it.
:bigcry:
Comment

Comment