Announcement

Collapse
No announcement yet.

Go Pro mounting in CSL ?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Graham
    replied
    That's why I like it as you get a better view for certain things rather than just what's ahead of you...

    Leave a comment:


  • 3wheels3
    replied
    Eh that is cool Graham. If I may also add a good point well made for advantages of helmet cams!

    Leave a comment:


  • Graham
    replied
    Helmet cams are cool....

    Leave a comment:


  • breeze
    replied
    Originally posted by monkeycsl View Post
    Helmet helmet helmettttt :119:
    Yep, will try mounting to the helmet too...

    Leave a comment:


  • breeze
    replied
    Originally posted by adem.csl View Post
    Attachment omitted from migrationI used the sticky 3m pad flat mount and stuck it behind the mirror on passenger side so its out the way.most tracks don't allow suction cup mounts and i saw one person get his converscates cos he kept trying to use it on track you can see in this pic where mine is
    That was the route I went in the end - perfect mounting, stable and not visible when in the car.

    I do quite fancy an external suction mount at some point (doors, roof) but I am aware that they can be difficult with some TD organizers.

    Thanks all. :thumbs:

    Leave a comment:


  • karbonkid
    replied
    Originally posted by DuncanR View Post
    Ref mounting point on bumper see attached.
    This video has NOT been speeded up !:-D
    http://www.youtube.com/watch?v=rUa_teR4UKE

    Pix to help illustrate Dunc's possible mount point. I tried 4-5years ago and worked great.


    Leave a comment:


  • DuncanR
    replied
    Ref mounting point on bumper see attached.
    This video has NOT been speeded up !:-D

    Leave a comment:


  • adem.csl
    replied
    I used the sticky 3m pad flat mount and stuck it behind the mirror on passenger side so its out the way.most tracks don't allow suction cup mounts and i saw one person get his converscates cos he kept trying to use it on track you can see in this pic where mine is
    Attached Files

    Leave a comment:


  • breeze
    replied
    Resurrecting this thread now that I have got myself a shiny new GoPro Hero3 silver.

    Was there a preferred answer to this for in-car mounting?

    Options I see are:
    - Rear view mirror (with a sticky pad?)
    - Passenger sun visor
    - Suction mount, which may or may not be acceptable on TDs.

    Hmm...

    Leave a comment:


  • Porter
    replied
    Originally posted by 83SY View Post
    I like the sound of this mounting point Ando. Have you got any clips you can load up onto the thread ?

    :supz:
    It would be great to see how you install the set up on the car, too, of that's ok.

    Thanks.

    Leave a comment:


  • 83SY
    replied
    I like the sound of this mounting point Ando. Have you got any clips you can load up onto the thread ?

    :supz:

    Originally posted by ando View Post
    I use the wrist band mount thingy and cable tied it to the front grill under the number plate, gives a great low angle on track, shows speed and looks good.

    HTH

    Ando

    Leave a comment:


  • monkeycsl
    replied
    Helmet helmet helmettttt :119:

    Leave a comment:


  • acidace
    replied
    Sound Problem with go-pro

    First I mounted the gopro on the Cage with a roll bar mount just behind the seat, but every little movement from the chassis/cage while driving could be heared on video as a loud squeak.

    Now I have a other sound problem: the gopro is mounted on in the middle on front window and there is a whistling noise when accelerating. I can hear it only on Video, for example when I start a lap on the nürburgring or accelerating after Adenauer Forst. IMHO it is a electrical field from the engine. And it was NOT audible when I had the cam at the cage!

    Does anyone have the same problem? Or a solution?

    Leave a comment:


  • ando
    replied
    I use the wrist band mount thingy and cable tied it to the front grill under the number plate, gives a great low angle on track, shows speed and looks good.

    HTH

    Ando

    Leave a comment:


  • J13NY S
    replied
    Rear window not a good idea.

    I used my cousins original GoPro Hero as my new Hero2 showed up ONE day after I left for the Ring.. not impressed GoPro!!

    However mounting it on the rear window is to far back & you wouldn’t get a good/clear picture out the front window.

    I’d an added problem too, my cousin lent it to a fella who lost all the feckin mounts, so I'd to improvise with a 12euro phone mount out of the service station as you exit the Eurotunnel, did the job better than I thought it would & even better now when I read the posts above & realise I'd had the same problem with the proper mount getting enough angle on it when trying to mount it on the front window.

    Leave a comment:

Working...
X