Help what has happend

[plumber vic]

Had some second hand kw3 fitted friday ,tracking and alinement done today .
Took it for a run hit a bit of bump a crash from rear end 4" of steel pin with nut on sticking through suspension in boot.
Awaiting 5 hrs for recovery:bigcry::bigcry::bigcry::bigcry:

[Chris-CSL]

Not good Well as long as you are ok thats what matters

[phoenixcsl]

Jesus, that sounds traumatising.

Has the rear strut completely failed?

[shane@mbtech]

Any pictures.

Sounds like either your topmount failed, turret tower failed or installation error.

[plumber vic]

only do about 25 mph still waiting CRAPPY AA

[shane@mbtech]

only do about 25 mph still waiting CRAPPY AA

Take a pic on phone and text it me.

No is in your message inbox

[Porter]

I've done this. The top mount has failed, with the chrome part of the shock absorber coming up into the boot. In my case, it was becasue the large dome-shaped washer that fits over the threaded top of the shock has too small a hole for the KWs. Without it, a decent hole in the road will send the shock through the mount.

There will be no damage to the car - just take the boot carpet up round the shock mounts and replace the originals with the Rogue Engineering version. I've been trouble-free since.

Makes a crappy noise, doesn't it?

[plumber vic]

Thanks Shane:-D

[plumber vic]

At last

The AA arrived with lower loader 8am:wanker::wanker::wanker:

[Bounce]

Hope you get it sorted ok mate.

[Graham]

I would be complaining about that Vic, that takes the piss

[plumber vic]

Recoverd to garage waiting outcome tomorrow.

[CraigMillwardCroft]

I would be complaining about that Vic, that takes the piss

Don't you have to be female or gay to get fast recovery :whistle:

[Graham]

Don't you have to be female or gay to get fast recovery :whistle:

Doesn't explain why Vic was recovered slowly then :gayfight:

[plumber vic]

:birdman: