Two for the price of One

[Neil M]

Well not quite, this may be of interest to the more mechanically minded amongst us, a DIY CSL, just listed on Piston Heads :

http://classifieds.pistonheads.com/classifieds/parts-and-plates/breaking-and-damaged/bmw/bmw-m3-csl-x2/678600

[DuncanR]

Strong money for that methinks ! especially @ 60k !
@ Shim - go visit mate and grab those VIN numbers quick !:-D

[Barry C]

it would have to be priced under £15k to make that worth while I would guess and even then I still think it may not be worth it.

Think of all the little bits and bobs that are needed to make it perfect, you also have to service everything while it was off.

£20k seems crazy

[CraigMillwardCroft]

Does seem a high price for the work

[83SY]

Does seem a high price for the work

Crazy money :bigcry:

[CraigMillwardCroft]

Crazy money :bigcry:

If he gets it, could be a saleman for you :whistle:

[billyboysm3]

Nice little project for Gareth!!!

[alexk]

If only they were LHD :drool:

[Yanto_csl]

Fookin rip off...

So you're getting the innards of the one car (less fooked bits) and a good shell only ?

And then youve got to put it together yourself ?

For £20K !!!!

Worth no more than 12-13k

[Bounce]

Fookin rip off...

So you're getting the innards of the one car (less fooked bits) and a good shell only ?

And then youve got to put it together yourself ?

For £20K !!!!

Worth no more than 12-13k

Agree,I'd rather buy a high miler for that money.fook putting it together

[Yanto_csl]

Bastard thing is, someone will buy for 13 ish, spend 5k putting right and try and flog an hpi clear 60k mile CSL for £24k !:moan:

[Graham]

If it was around 10k I'd consider doing that, would be a fun little project. But I imagine if it was 10k it would get snapped up. Way too much money. Plus there's bound to be things damaged aswell that need replaced.

The rolled M3 is probably worth 4k tops. And the CSL shell at the very very most, 5k? Don't see where the 20k has come from.

[giraffe]

Nice little project for Gareth!!!

Way to strong money for me , if it cost more than £50 i cant afford it :bigcry:

[shimmy]

Way to strong money for me , if it cost more than £50 i cant afford it :bigcry:

lets go halves and put in a cheeky £100 bid :-D

[Bounce]

Agree,I'd rather buy a high miler for that money.fook putting it together

If it was around 10k I'd consider doing that, would be a fun little project. But I imagine if it was 10k it would get snapped up. Way too much money. Plus there's bound to be things damaged aswell that need replaced.

The rolled M3 is probably worth 4k tops. And the CSL shell at the very very most, 5k? Don't see where the 20k has come from.

There both CSLs,still to much though.