Thank You Spires and Nitron

[O'Neill]

I’d been thinking about changing my Nitron set up to Intrax, but after speaking to Dave (Pooky member on here who does this type of thing for a living) I changed my mind and decided to stay with Nitron and uprate the springs to 120/60 with a rear coilover, with tailored helper springs recommended by Dave.

Went for the upgrade this morning with Dave (Spires) and all was going well, until Dave tested my rear dampers after taking them off, they were fooked:bigcry:. The first 25% of movement had hardly any damping, a text and a phone call to Nitron later; I was the owner of some new spec dampers which Dave had there:supz:. Thanks Nitron and Dave for sorting this:thumbs:.

Afterwards everything went to plan, full set up, corner weight 50/50 both diagonals and Lawsy’s ex exhaust fitted.
All in all, great service from Dave (Spires) and Nitron.

Looking forward to my next TD to see how it goes:smokin:.

[shane@mbtech]

Most important question, does it sound better, and does it sound fasterartyman:

[shimmy]

Good to hear its sorted

How were they fooked ONeill? Thye are only a few miles old

[O'Neill]

Most important question, does it sound better, and does it sound fasterartyman:

Deeper sounding under 3k, motorway speeds no different to oem:smokin:

Good to hear its sorted

How were they fooked ONeill? Thye are only a few miles old

I didn't notice a difference in performance only a knocking with rear seats out. Dave's buisness partner was horrified said it sounds like the piston is scraping against the body, lost gas pressure and they aint going back on the car until sorted:bigcry:I was ready to ring Sarah to pick me up.

[s.mac]

have you got a picture of both the old rear springs?

[O'Neill]

have you got a picture of both the old rear springs?

They were barrel springs, Eibach.

If you want a pic still I'll post one.

[s.mac]

they were separate to the damper though? I was just interested, AST explained and showed me what happened to my springs, thought you may have had a similar issue. I thought they were talking bollocks until they went through it. Suspension/set ups are way more complicated than you 1st think!!

[Bealo]

Good to hear you got it sorted... be interested how the car is on track now?

[billyboysm3]

Nice one Barry, that's defo worth a second or so on track. The shimmeister better watch out!!!

[83SY]

Good work mate! Bet that exhaust sounds awesome!

Considering taking my rear seats out, is it mega noisy driving down the motorway? :thumbs:

[O'Neill]

Good work mate! Bet that exhaust sounds awesome!

Considering taking my rear seats out, is it mega noisy driving down the motorway? :thumbs:

More tyre noise on the motorway but sounds like race car full throttle:smokin:

[karbonkid]

What spring rates were you running prior to change over and what issues you were faced with on original set up?

[O'Neill]

What spring rates were you running prior to change over and what issues you were faced with on original set up?

80N/m front and progressive rear 45-82-110N/m standard mounting position.

No issues with the original setup other than the rear knocking, just wanted to try higher spring rates and whilst doing that went with the rear coilover.

[DuncanR]

Rear seats and internal trim are for pussys ! :supz:

[O'Neill]

Rear seats and internal trim are for pussys ! :supz:

:hahaha: I'm running with the dogs now Dunc:smokin: