Large balls up today :(

[Steve B]

Fitting my brand new Michelin Pilot Super Sports I managed to damage a fookin sidewall

New tyre required.... To say I was pissed off was an understatement especially as I've fitted probably 500+ tyres and this is the 1st time I've ever damaged 1...


Gutted
Steve

[Bounce]

Fitting my brand new Michelin Pilot Super Sports I managed to damage a fookin sidewall

New tyre required.... To say I was pissed off was an understatement especially as I've fitted probably 500+ tyres and this is the 1st time I've ever damaged 1...


Gutted
Steve

Unlucky mate.

[Sailorbaz]

Sorry to hear this mate, that's a rather expensive mistake. I made one recently with my e90 M3 but will save that discussion for a drunken night on the anniversary tour in may. There will be beer wont there?!?!

[DuncanR]

Fitting my brand new Michelin Pilot Super Sports I managed to damage a fookin sidewall

New tyre required.... To say I was pissed off was an understatement especially as I've fitted probably 500+ tyres and this is the 1st time I've ever damaged 1...


Gutted
Steve

Clingfilm it, that will hold !:finga:

Disclaimer : The views of the author are not necessarily those of Michelin or any of its distributors :wink:

[Pip1968]

Really sorry to hear that although I struggle to see how you could have damaged the side wall that much. Surely it is just a little nick and still workable - ?

Pip

[DuncanR]

Really sorry to hear that although I struggle to see how you could have damaged the side wall that much. Surely it is just a little nick and still workable - ?

Pip

If its not through to the canvas yet ... stick it i the FS section !:whistle:

[Steve B]

Really sorry to hear that although I struggle to see how you could have damaged the side wall that much. Surely it is just a little nick and still workable - ?

Pip

Not worth the risk..... can you imagine full tilt on a lap of the Ring and it decides to let go:119::119::119:

Anyway I was trying to work out the best way to get the tyre back off without damaging the rim as so I jigsawed it off in 3 bits.....lol

[Bounce]

As Dunc says put them in the for sale section,they'll do for somebody's push bike

[Steve B]

Or use the centre bit to retread a 175/80/13 tyre..... lol


Typical really as the cars in my garage on an axle stand after coming back after its subframe replacement, I'd have loved a run out yesterday in the sun really..


Steve

[shane@mbtech]

Not worth the risk..... can you imagine full tilt on a lap of the Ring and it decides to let go:119::119::119:

Anyway I was trying to work out the best way to get the tyre back off without damaging the rim as so I jigsawed it off in 3 bits.....lol

Thats why you nicked it, trying so desperately not to damage your rim. I have done the same on one or two tyres over the years. Shit happens though mate.