on the bright side its snowing at the ring and spa!
a credit note might not be such a bad thing:wink:
Announcement
Collapse
No announcement yet.
Alcon Conversion Front Wheel bell. Where from??
Collapse
X
-
Hard to say as not much to go on, but my car does have Mcguard locking nuts on the front!Originally posted by karbonkid View PostInterestingly I see the picture below on Thorney's website, showing smaller piston at the top:
Whos car is this? Johnnywb?
Unless they cocked up the install somewhere else too.
So, it appears that Cecil will not ride this weekend. All the parts arrived, but there is a difference in the bolt holes on the bobbin and on the disc. On the disc they are 8mm and on the bobbin 6mm. (or something along those lines) and there isn't time to sort.
I'll speak to Dave next week and discuss how to move forwards. As this was a last ditch attempt to fix quickly, we may rethink what we do. I've offered him my car to work with to get a fix sorted.
Will keep you all posted as to what happens as i guess there are going to be other people with this problem.
Leave a comment:
-
the fact that the bells are black suggests that they are not even hard anodised, which won't make much difference if they have been carved out of cheese I admit, just smacks of cost cutting
Leave a comment:
-
-
Despite UPS best efforts, we have all the parts. (Huge thanks to George at Technosport who went to get them from UPS last night).
They're working on fitting them now, may not be as straightforward as hoped.
Can't thanks George and the guys at Technosport and Dave at Ears enough.
Alcon still haven't called me back by the way...
Leave a comment:
-
Hi,
Quote- ''Wouldn't happen in USA...
Not so sure about that as Texas and
the supplier have a lot in Common.
Regards,
The Gorilla.
Leave a comment:
-
Alcon said to my friend that they had used a poor grade of alloy.
Steve
Leave a comment:
-
I'm confused, what is actually happening? It looks as though the pad is eating away at the bell?Originally posted by Steve B View PostThese are the floating Alcons on my mates Astra T9.... He also spoke to Alcon and they admitted it was their fault but won't do anything about it....


Leave a comment:
-
You don't get those problems with AP's quality stuff and very good aftercare :-D
Leave a comment:
-
These are the floating Alcons on my mates Astra T9.... He also spoke to Alcon and they admitted it was their fault but won't do anything about it....

Leave a comment:
-
Thanks all.
I'll speak to the guys in the morning and find out whether anything turned up and find out what state the car's in and go from there.
Still haven't given up hope!
The bell housings were shipped with UPS, who normally i find pretty reliable, so it's a bit odd, but hey ho.
Leave a comment:
-
Hi,
Given all the arrangements and no
doubt costs, can anybody help
with Front Alcon Disc belles ?
Failing which, between Shimmy,
and Nathan's kind offers, I am
also willing to assist with Calipers,
Discs whatever, I am sure you
would be able to sort out front
Brakes by close Friday [tomorrow] and
be set to go for Saturday ?
If I can help in anyway I will.
Regards,
The Gorilla.
Leave a comment:



Leave a comment: