Announcement

Collapse
No announcement yet.

Alcon Conversion Front Wheel bell. Where from??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • northernjim
    replied
    on the bright side its snowing at the ring and spa!


    a credit note might not be such a bad thing:wink:

    Leave a comment:


  • Johnnywb
    replied
    Originally posted by karbonkid View Post
    Interestingly I see the picture below on Thorney's website, showing smaller piston at the top:

    Whos car is this? Johnnywb?
    Hard to say as not much to go on, but my car does have Mcguard locking nuts on the front!

    Unless they cocked up the install somewhere else too.

    So, it appears that Cecil will not ride this weekend. All the parts arrived, but there is a difference in the bolt holes on the bobbin and on the disc. On the disc they are 8mm and on the bobbin 6mm. (or something along those lines) and there isn't time to sort.

    I'll speak to Dave next week and discuss how to move forwards. As this was a last ditch attempt to fix quickly, we may rethink what we do. I've offered him my car to work with to get a fix sorted.

    Will keep you all posted as to what happens as i guess there are going to be other people with this problem.

    Leave a comment:


  • northernjim
    replied
    the fact that the bells are black suggests that they are not even hard anodised, which won't make much difference if they have been carved out of cheese I admit, just smacks of cost cutting

    Leave a comment:


  • karbonkid
    replied
    Interestingly I see the picture below on Thorney's website, showing smaller piston at the top:

    Whos car is this? Johnnywb?


    Comparison of another set with larger piston at top.

    Leave a comment:


  • Johnnywb
    replied
    Despite UPS best efforts, we have all the parts. (Huge thanks to George at Technosport who went to get them from UPS last night).

    They're working on fitting them now, may not be as straightforward as hoped.

    Can't thanks George and the guys at Technosport and Dave at Ears enough.

    Alcon still haven't called me back by the way...

    Leave a comment:


  • Johnnywb
    replied
    Originally posted by The Gorilla View Post
    Hi,

    Quote- ''Wouldn't happen in USA...

    Not so sure about that as Texas and
    the supplier have a lot in Common.

    Regards,

    The Gorilla.

    :hahaha:

    Leave a comment:


  • The Gorilla
    replied
    Hi,

    Quote- ''Wouldn't happen in USA...

    Not so sure about that as Texas and
    the supplier have a lot in Common.

    Regards,

    The Gorilla.

    Leave a comment:


  • Steve B
    replied
    Too right.....


    Wouldn't happen in USA...

    Leave a comment:


  • shimmy
    replied
    Originally posted by Steve B View Post
    Alcon said to my friend that they had used a poor grade of alloy.


    Steve
    IMHO they are not fit for purpose and I would be camped out on their doorstep demanding my money back (Thorney if he fitted them)

    Just plain dangerous

    Leave a comment:


  • Steve B
    replied
    Alcon said to my friend that they had used a poor grade of alloy.


    Steve

    Leave a comment:


  • KPNUTZ
    replied
    Originally posted by Steve B View Post
    These are the floating Alcons on my mates Astra T9.... He also spoke to Alcon and they admitted it was their fault but won't do anything about it....




    I'm confused, what is actually happening? It looks as though the pad is eating away at the bell?

    Leave a comment:


  • CraigMillwardCroft
    replied
    You don't get those problems with AP's quality stuff and very good aftercare :-D

    Leave a comment:


  • Steve B
    replied
    These are the floating Alcons on my mates Astra T9.... He also spoke to Alcon and they admitted it was their fault but won't do anything about it....




    Leave a comment:


  • Johnnywb
    replied
    Thanks all.

    I'll speak to the guys in the morning and find out whether anything turned up and find out what state the car's in and go from there.

    Still haven't given up hope!

    The bell housings were shipped with UPS, who normally i find pretty reliable, so it's a bit odd, but hey ho.

    Leave a comment:


  • The Gorilla
    replied
    Hi,

    Given all the arrangements and no
    doubt costs, can anybody help
    with Front Alcon Disc belles ?

    Failing which, between Shimmy,
    and Nathan's kind offers, I am
    also willing to assist with Calipers,
    Discs whatever, I am sure you
    would be able to sort out front
    Brakes by close Friday [tomorrow] and
    be set to go for Saturday ?

    If I can help in anyway I will.

    Regards,

    The Gorilla.

    Leave a comment:

Working...
X