Announcement

Collapse
No announcement yet.

Changing seats - Sacrilege?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Changing seats - Sacrilege?

    Just bought a pair of recaro touring car style seats for the race car, but considering using them in the CSL to reduce the wear on the orginals and for a bit of extra comfort, and for the harness loops for the trip.

    However, is it sacrilege to change the inteior on a cesil. Kinda feels like it would be a bit wrong to change anything and to "muck around' with it.

    Thoughts?

    #2
    I put a bucket seat in mine.
    Just be sure and keep the original ones.

    Comment


      #3
      Have you got a picture of yours in situ?

      think these may look slightly out of place, butits more about having the harnesses in properly and being safe and comfortable.

      Comment


        #4
        they do look a bit aggressive and may not work with seatbelts due to the high sides

        i have a Recaro Profi SPG XL on drivers side and love it

        Comment


          #5
          not sure I would use those on a road car, "eared" seats, reduced visibility and no longer allowed on tourist days at the ring

          profi spg's are awesome,

          Comment


            #6
            They are primarily for the race car so needed head protection. I have the schroth quick release harnesses in the csl so no worry about seat belts. But if they aren't allowed at the ring that's made the decision for me

            Comment


              #7
              Here's some pics,
              I made my own floor mount as you can see so please don't laugh :hahaha:







              Originally posted by gingernuts View Post
              Have you got a picture of yours in situ?

              think these may look slightly out of place, butits more about having the harnesses in properly and being safe and comfortable.

              Comment


                #8
                Think I asked this question before but I cant quite remember, Shimmy you are pretty tall. With the Profi SPG does the seat sit any lower or indeed does it sit a little higher ???

                My standard seat is in its lowest position and whilst it is fine I would like to sit a little lower...

                Comment


                  #9
                  I find this too. I'm only 6ft but i do like to sit a bit lower. Got mine on the lowest setting and its still not enough

                  Comment


                    #10
                    Originally posted by chrisburns View Post
                    Think I asked this question before but I cant quite remember, Shimmy you are pretty tall. With the Profi SPG does the seat sit any lower or indeed does it sit a little higher ???

                    My standard seat is in its lowest position and whilst it is fine I would like to sit a little lower...
                    I had profi spgxl Without runner first and it was very very low (even I looked short in the car)

                    Now with runner it is still lower than OeM seats.

                    Comment


                      #11
                      I wont do harnesses without a roll cage

                      Comment


                        #12
                        I'm fitting gt3. Seats to mine so as can use the schroth clip in harness set,
                        There are conflicting view about this, I,e should only be used with a cage.
                        As said before you may get trouble from marshals at tf as "eared" seats are no linger permitted.

                        Comment

                        Working...
                        X