Presentation and consultation

[race.it]

Ola Sergio

If you're in Marbella area, PM me - am here all week :beer:

And i am just up the road from him, close to Gibraltar :beer:

[Yanto_csl]

Banus, Friday night.....I'll be in the espadrilles and the white Testarossa drinking black jacks at Sinatras....:supz:

[alexk]

Hello and welcome !

Don't put the APs, they just work and it is boring to have top brakes, cheaper than the competition, very good aftersales service etc etc
Go for something more adventurous, like alcon csl crap kit etc.
You won't be bored again !

Just kidding

[el buta]

welcome cslregister


PD: Pon alguna foto del CSL

[M@X]

Un saludo Sergio :thumbs:

[M@X]

Anybody knows Ferodo DSP pads and if they are good pads for CSL ?

What pads are best for the CSL Alcon KIT for road and track race using 50% ?

[devam]

The rs 29's squeal badly with oem calipers, is this correct anyone with this experience?

[Pip1968]

You might want to look at this long thread from the 'Technical' section:-

https://nam3forum.com/forums/forum/csl-register/general/csl-technical-area/517244-pagid-rs29-pads-screeching

Pay attention :whistle:.

Pip :blalalala:

[shimmy]

Welcome

AP

RS29

ear plugs just incase

enjoy

[Clubber]

The rs 29's squeal badly with oem calipers, is this correct anyone with this experience?

This was my very question at the other thread last week.

Yesterday I installed the Pagid RS29 front and rear on my OEM calipers, largely applied Cera Tec Anti Squeal Lubricant, SS Brake Lines and Castrol SRF brake fluid.

And after the initial bedding in procedure, at the moment there is no noise. Knock on wood Although it's only been 150kms with them. I will update here if the noise starts later on. But as I understand this Cera Tec stuff and proper bedding in is crucial in noise issue.

BTW, Stopping power and pedal feel has MUCHLY improved. Sort of like a midway from stock setup and BBK.