I want

[alexk]

Danny I agree with all.
Its just a bespoke setup like any TTX implementation on a bmw I know this very well.


Martin if you have the ohlins part number I could shed some light.

[trackm3_csl]

Hi Alex,

To run a shorter rear coilover is not
a major problem just require ''extended''
hangers, same basis as the Intrax rear
coilover ect

Fronts, unscrew the rod end housing at the
tops and fit 'extension' rods.
ie] increase length of damper rod
Reduces unsprung weight and with the
correct extension you can play around with
ride height and use the same ''Mac''
top mounts.

Having shorter rear spring is good
on Track Car, but needs a thought
out progressive spring, so that you
keep of the bump stops as much
as possible.

Not exactly plug and play, but no
re-inventing either.

Regards,

The Gorilla.

We are having the Schnitzer mounts made as we have the CAD drawings, they allow the top eye to be shimmed over for more accurate Camber adjustment, Pics when there done

M

[Eduardo]

Got four way Intrax in mine :-D

Eduardo.

[Eduardo]

Just checked 3 ways i think

Eduardo.