Fitting after market seat

[uncle benz]

Mr Benz, that's not much good if you have a slider as the belt socket doesn't move!

Mine is secured through the Recaro seat side mount or maybe the slider itself With washers and HT bolt.

My Harness securing points are however bolted through the car floor as Mr Benz says

It's just the fact that people will secure the thing to the side mount with a bloody great 7/16" high tensile bolt, but then bolt the side mount down with two 8.8 grade m8 bolts about 12" apart. Seems bonkers to me.
I've used an old rear clasp on a short length of webbing, sharing the bolt used for the harness on the tunnel.

Slider? Who else needs to drive your car?

[shimmy]

It's just the fact that people will secure the thing to the side mount with a bloody great 7/16" high tensile bolt, but then bolt the side mount down with two 8.8 grade m8 bolts about 12" apart. Seems bonkers to me.
I've used an old rear clasp on a short length of webbing, sharing the bolt used for the harness on the tunnel.

Slider? Who else needs to drive your car?

What are oem seats secured with?

Never used to have a slider, but BMW and Simpsons couldn't test drive it....

Also I have different driving positions for track and road:smokin:

[uncle benz]

What are oem seats secured with?

Never used to have a slider, but BMW and Simpsons couldn't test drive it....

Also I have different driving positions for track and road:smokin:

I was forgetting about your gangsta lean...

[O'Neill]

I retained my 3 point seat belts as well as running a 6 point. I have Recaro's FIA mounts & sliders and they come with the brackets to allow you to opt for this.

For the VAC mounts you'll need these:

http://store.vacmotorsports.com/vac---factory-seat-belt-adapter-kit-p2072c60.aspx?Thread=True

Macht Schnell also do some that should be compatible. These are similar to the Recaro ones. However the Recaro ones come with a welded nut the other side so the receptors bolt straight on.

https://www.machtschnell.com/product/hybrid-seatbeltharness-receptacles-competition-liteweight-floor-mounts

Should have some pics if need be.

KK/Alex, are you using a recaro floor mount for the e46 or do you use vac mounts.

[O'Neill]

Ive got a brand new Macht Schnell for the drivers side that i never used when i fitted the Recaro CS's in the CS....i'll dig it out if you want it

Thanks for the offer:thumbs: I'll let you know in a couple of days.

[karbonkid]

KK/Alex, are you using a recaro floor mount for the e46 or do you use vac mounts.

I run Recaro FIA sides & floor mounts. Took me a while to get the set up how I wanted it - retaining a 3 point & including a 6 point without having to drill through the floor.


Below shows how the kit comes:

LEFT- Floor mount/ RIGHT - Slider (the 2x bars packed on the right you do not use)

[O'Neill]

I run Recaro FIA sides & floor mounts. Took me a while to get the set up how I wanted it - retaining a 3 point & including a 6 point without having to drill through the floor.


Below shows how the kit comes:

LEFT- Floor mount/ RIGHT - Slider (the 2x bars packed on the right you do not use)

Thanks, who did you buy from and what do I ask for, part numbers etc.

[karbonkid]

Thanks, who did you buy from and what do I ask for, part numbers etc.

I think Mark at NCB sorted me out at the time through Recaro directly in Germany. IIRC they are made to order but some may stock them.
Speak to Capital Seating, they may have stock. Sorry no part numbers, just state E36/ E46 M3.

[alexk]

I am totally confused on what I need to install recaro pole position seats :banghead:

[shimmy]

I am totally confused on what I need to install recaro pole position seats :banghead:

i think the first thing you need is TUV approval

[alexk]

i think the first thing you need is TUV approval

This is sorted !

[shimmy]

This is sorted !

:hahaha:

[alexk]

Seriously guys. What do i need ?

I saw some bottom bases.
Then some sliders.
Then some side mounts.
Do i need seat belt adapter too (for OEM seatbelt)

[alexk]

I run Recaro FIA sides & floor mounts. Took me a while to get the set up how I wanted it - retaining a 3 point & including a 6 point without having to drill through the floor.


Below shows how the kit comes:

LEFT- Floor mount/ RIGHT - Slider (the 2x bars packed on the right you do not use)

If i buy this and the side mounts (big recaro sticker), am I ok ?

[karbonkid]

If i buy this and the side mounts (big recaro sticker), am I ok ?

Alex, there are only 2 parts needed to enable you to fit a seat which are required:

1. Side mounts - required.
2. Floor mounts - required.

Sliders - required only if you want to adjust seat. (Remember this will raise the seat higher).