front and rear brembos

[baldydaz]

[s.mac]

look a good fit, are you going to re paint and match up with new decals ?

[alexk]

Question :
What is the story with the rear shock that is USD (upsidedown) ?
Is it bilstein (which model etc) ?

[M3RS]

Is that the caliper from the 996 Turbo / 996 GT3? Where you got the mounting brackets from?

[funtime]

Is that the caliper from the 996 Turbo / 996 GT3? Where you got the mounting brackets from?

PM MattCSLnut on here...

[mattCSLnut]

PM MattCSLnut on here...

I'm "All Out" of BREMBO conversion brackets at the moments as the "Cutters" boys have emptied my stash :hahaha: More can be re ordered :thumbs: but a minimum of 3 people per order is required by the Machine Shop.

Obligatory pix attached below for Glendogs pleasure :blalalala:

[glendog74]

Sweet whoring work mate :thumbs:

[M3RS]

Great. So I want to order some brackets. Now we only need two other people.

I have read a few threads about the brembo calipers. The one from a 996 Turbo (big red) is too big. But the Boxster "S" will fit and work perfect?

So I'm looking also for some used Boxster "S" calipers.

[karbonkid]

Sweet whoring work mate :thumbs:

Yea & I see you've lined up those centre badges nicely too, not like the other hooligan.
Robs gonna pretend he didn't spot that! :hahaha:

[glendog74]

Yea & I see you've lined up those centre badges nicely too, not like the other hooligan.
Robs gonna pretend he didn't spot that! :hahaha:

:hahaha: :hahaha: :hahaha:






:whistle:

[mattCSLnut]

Sweet whoring work mate :thumbs:

I THANK You :-D

[mattCSLnut]

Yea & I see you've lined up those centre badges nicely too, not like the other hooligan.
Robs gonna pretend he didn't spot that! :hahaha:

:hahaha: :hahaha: :hahaha: :whistle:

[mattCSLnut]

Great. So I want to order some brackets. Now we only need two other people.

I have read a few threads about the brembo calipers. The one from a 996 Turbo (big red) is too big. But the Boxster "S" will fit and work perfect?

So I'm looking also for some used Boxster "S" calipers.

Don't overlook the full set up off a Cayman S or 996 derived 911 BREMBOs either as they are the same as the Boxter S
What you want is the full (front & rear) BREMBO set up off either of these Porkers :thumbs: Part number are: 996.351.425 for N/S front and 996.351.426 for O/S front ... 996.352.421 for N/S rear and 996.352.422 for O/S rear.
Douglas Valley usually have a set of these FOR SALE http://www.douglasvalley.co.uk/ :thumbs:

[M3RS]

Thanks for the partnumbers. Much easyer now to check ebay. :thumbs:

How much are the brackets only for the front? I will drive with the standart caliper in the rear (with racingpads).

[s.mac]

Matt you have pm