Announcement

Collapse
No announcement yet.

MY Evo 5 rolling road print out

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    MY Evo 5 rolling road print out

    This is the rolling road print out we got last week running switchable maps and 25% Methanol mix
    To say it’s fast is an understatement it’s a bit scary now .
    468bhp
    458ftlb

    This is wheel Hp :thumbs:
    Attached Files

    #2
    Very good figures that Mark :smokin:
    Must be a hoot :thumbs:

    Comment


      #3
      Its a bit scary to drive now :hahaha: wheels light up in third gear :whistle:

      Still thats what i wanted More Power :thumbs:

      Comment


        #4
        That's serious mumbo at the wheels Mark. :thumbs: Nice. Lots of transmission losses on them Evo's. Must be quite serious flywheel power! High 500's?

        Comment


          #5
          Originally posted by AlexGTT View Post
          That's serious mumbo at the wheels Mark. :thumbs: Nice. Lots of transmission losses on them Evo's. Must be quite serious flywheel power! High 500's?
          Approx 21% losses.

          Comment


            #6
            Originally posted by lawsy View Post
            Approx 21% losses.
            Wow, very close to 600bhp then. :thumbs:

            Comment


              #7
              Originally posted by AlexGTT View Post
              Wow, very close to 600bhp then. :thumbs:
              Although most on mlr use 24% losses, 21% is more accurate.

              Comment


                #8
                Is that a bit of valve float at 6400rpm mark?

                What spec is she. My business partner just gone long rod 2.0litre on his with s205b, just running in now then full on mapping session. He is hoping for 560 ish. Evo 9 with cams and headwork.

                Comment


                  #9
                  You seen the changes to the MoTeC PnP kits on these? Even better value now.

                  Comment


                    #10
                    Originally posted by lawsy View Post
                    Is that a bit of valve float at 6400rpm mark?

                    What spec is she. My business partner just gone long rod 2.0litre on his with s205b, just running in now then full on mapping session. He is hoping for 560 ish. Evo 9 with cams and headwork.

                    Its a 2.0 with oliver rods and wisco pistons balance shafts removed and Hks 274 and 278 cams uprated Hks valve springs running the Turbo Tecnic s205b at 2.2bar boost:thumbs:

                    Almost 10k and counting and thats just the engine :hahaha:
                    i am on my second diff and i have orderd an Evo RS Diff now

                    It is running the standard evo 5 ecu with switchable map and launch control:whistle:
                    Attached Files

                    Comment


                      #11
                      He already on RS diff.

                      He says by far the biggest difference was the ACD mapping, by far the best mod he has done. Many swear by this now.

                      Comment


                        #12
                        I seen this on the MLR but my 5 has not got the ACD
                        its been on the rolling road for hours geting the most out the cams and the map but its showing great power for a 2.0 with the s205b

                        Russ the mapper has been great and its the best power from the S205b he has seen and we have 3 evos with the same spec and all the cars are within 10bhp of each other.

                        This video is with 400bhp at the wheels it should be quicker now :whistle:



                        This was on the rolling road the day it was mapped

                        Comment


                          #13
                          mark

                          you seem to be missing some cylinders

                          tinrfd

                          Comment


                            #14
                            Originally posted by shimmy View Post
                            mark

                            you seem to be missing some cylinders

                            tinrfd

                            Yip found out they were slowing me down shimmy flung them away and bolted on a turbo (wait BMW do that now ):whistle::hahaha::hahaha::hahaha::hahaha:

                            Comment


                              #15
                              Originally posted by Mark CSL View Post
                              Yip found out they were slowing me down shimmy flung them away and bolted on a turbo (wait BMW do that now ):whistle::hahaha::hahaha::hahaha::hahaha:

                              Yep, for fuel economy and emissions :supz:

                              Comment

                              Working...
                              X