Jack?

[glendog74]

Sorry, boring question for the guys who own a spare set of track day wheels:

What type/make of car jack do you use when swapping them over? :smt017

I need to get one for next year when i take Cups along with me.

Cheers! :-D

[Mark CSL]

Hi i have 1 of these but i just fit the cups before i go

If you jack it up just before the rear wheel you can do front and back at the same time :thumbs:


Ebay Link
http://cgi.ebay.co.uk/RED-ALUMINIUM-LOW-PROFILE-RACING-TROLLEY-JACK_W0QQitemZ120335614543QQcmdZViewItemQQptZUK_Li fting_Moving_Equipment?hash=item120335614543&_trks id=p3286.c0.m14&_trkparms=72%3A1301|66%3A2|65%3A12 |39%3A1|240%3A1318

[glendog74]

Blimey - that was quick! Cheers Mark :beer:

[Mark CSL]

Glad i was of some help :thumbs:

Just make sure that it has the 2 pumps at the bottom of the handel
as the jack with 1 is a bit slow to jack the car up

This has 1 look at the spring you can get it with 2 thats the better jack
:thumbs:

[_Nathan_]

Seen some stuff about the rear jacking points being weak. You can jack up the whole side of the car just using the front point too.

[shimmy]

yep, i only use front points and 1.5T jack easily lifts the car for both side wheels

and make sure its low entry jack of course (normally have smaller front rollers)