OEM size front brake disks

[s.mac]

Does anyone know if you can get OEM size front disks from any other manufacturers, Alcon , DBA 5000, Performance Friction etc etc must be 2 piece floating

Thanks

[s.mac]

345mm x 28mm :smt001

[Mark CSL]

Try HISPEC motorsport they do floating discs
I have them 380mm :thumbs:

[NZ_M3]

I believe the OEM brake disc supplier is ATE ... but Zimmerman also do an OEM replacement for the CSL and is cheaper than BMW.

[s.mac]

Try HISPEC motorsport they do floating discs
I have them 380mm :thumbs:

Thanks, I will have a look for a supplier, I'm stuck with the standard size.. my brake kit is taken from my old M3 so I can get caliper brackets made so I can put 345mm disks on from the 325mm performance friction disks that I have on now (m3 standard size) but I have to stay at 28mm wide, 345mm is the biggest disk size I have seen at 28mm, if you go any bigger the width also jumps up to 32mm.

I have found PF don't make a CSL size disk.

I believe the OEM brake disc supplier is ATE ... but Zimmerman also do an OEM replacement for the CSL and is cheaper than BMW

Thanks but they are all 1 piece

[NZ_M3]

Thanks but they are all 1 piece

Not according to the Zimmerman distributor here in NZ ...

http://www.trademe.co.nz/Trade-Me-Motors/Car-parts-accessories/BMW/Brakes/auction-225140296.htm

[s.mac]

Thanks, but they are a 1 piece cast and not proper 2 piece floating, thanks anyway

[Mark CSL]

Thanks, but they are a 1 piece cast and not proper 2 piece floating, thanks anyway

They are floating as the pins from the bell to the disc dont conduct heat :thumbs:

[s.mac]

sorry NZ M3 I thought they were only floating if they were 2 piece
thanks Mark