rear discs..?

[jibm]

hello all :thumbs:

any one got an idea whats involved with fitting new rear discs? i know that the hand break pads run inside the alloy bell - i guess what i am asking is how easy are they to fit

thanks

[dave1]

easy mate

[jibm]

great what time shall i expect you?

[shimmy]

Not as easy as fronts if the thing is friggin stuck to the handbrake shoes or whatever they are

mine were a pig

I can change my fronts in 30 mins but my rears drove me bonkers

[glendog74]

Simpson Motorsport have always changed mine - easy! :clown: :hahaha:

[AlexGTT]

Simpson Motorsport have always changed mine - easy! :clown: :hahaha:

Now that's what I call lazy Rob.:rolleye: But I do exactly the same:smt045:thumbs:

[J.D.]

Not too hard to change if you wind in the hand brake adjustment to get the shoes away from the drum.
Done by removing wheel then looking through a wheel bolt hole at about 2-3 o'clock. Will see a slotted adjustment wheel, poke flat bladed screwdriver through the hole and wind the wheel so the shoes come away from the drum. Then the disc should come off easily..:thumbs:

[shimmy]

Not too hard to change if you wind in the hand brake adjustment to get the shoes away from the drum.
Done by removing wheel then looking through a wheel bolt hole at about 2-3 o'clock. Will see a slotted adjustment wheel, poke flat bladed screwdriver through the hole and wind the wheel so the shoes come away from the drum. Then the disc should come off easily..:thumbs:

:beer:

[jibm]

thanks all, very helpfull ill let you know how i get on...now i cant seem to find the jack in the boot

[shimmy]

thanks all, very helpfull ill let you know how i get on...now i cant seem to find the jack in the boot

:hahaha:

You are a funny man

[Mark CSL]

thanks all, very helpfull ill let you know how i get on...now i cant seem to find the jack in the boot

Its under the cardboard floor :thumbs:

[Bealo]

Not too hard to change if you wind in the hand brake adjustment to get the shoes away from the drum.
Done by removing wheel then looking through a wheel bolt hole at about 2-3 o'clock. Will see a slotted adjustment wheel, poke flat bladed screwdriver through the hole and wind the wheel so the shoes come away from the drum. Then the disc should come off easily..:thumbs:

Cool, thats good to know, not that i'll be changing mine anytime soon lol...

[jibm]

great what time shall i expect you?

you can bring the cups with you :hahaha: