Announcement

Collapse
No announcement yet.

hello from greece..

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    hello from greece..

    well hello from me too..:beer:

    im nick from greece and just joined this forum...

    i dont have a csl but i am using a csl intake on my car
    and a lot of other things
    such as a set of acralite pistons with 12,5:1 cr
    and a pair of schrick cams 304/296-12,5mm lift
    and a load of other things...

    basically everything is changed:banghead: besides the interior ( i am looking for recaro pp or sparco or cobra seats at this time ) and the roof witch is going to be changed also with the cf one from the csl...

    a question to you all guys..

    i have seen in a lot of pics that some of the cars in the csl-cup and in some in the usa, are utilizing a hole in the left side headlamp of the car.
    the purpose is for more fresh air directly into the intake
    is it good for street use?
    any drawbacks ?
    what happens with rain?
    is it something different in the intake?


    does anybody has some pics from a car like this but inside the engine bay???
    i am thinking of fabricating something like that in my car..
    its not a race car though...

    well that's it for my 1st post here
    glad i joined lots of info so far!!!

    Nick

    #2
    Nick the Greek, Hi:thumbs:

    Comment


      #3
      nick...yeah

      greek...yes also

      but not that rich....!!!!!:bigcry:


      anybody has something on my question guys..???

      Comment


        #4
        Originally posted by nick///M3 View Post
        nick...yeah

        greek...yes also

        but not that rich....!!!!!:bigcry:


        anybody has something on my question guys..???
        are you right in the head ?

        Comment


          #5
          Originally posted by nick///M3
          well hello from me too..:beer:

          im nick from greece and just joined this forum...

          i dont have a csl but i am using a csl intake on my car
          and a lot of other things
          such as a set of acralite pistons with 12,5:1 cr
          and a pair of schrick cams 304/296-12,5mm lift
          and a load of other things...

          basically everything is changed:banghead: besides the interior ( i am looking for recaro pp or sparco or cobra seats at this time ) and the roof witch is going to be changed also with the cf one from the csl...

          a question to you all guys..

          i have seen in a lot of pics that some of the cars in the csl-cup and in some in the usa, are utilizing a hole in the left side headlamp of the car.
          the purpose is for more fresh air directly into the intake
          is it good for street use?
          any drawbacks ?
          what happens with rain?
          is it something different in the intake?


          does anybody has some pics from a car like this but inside the engine bay???
          i am thinking of fabricating something like that in my car..
          its not a race car though...

          well that's it for my 1st post here
          glad i joined lots of info so far!!!

          Nick

          Nick,

          I think I have seen the front end you are talking about. I'm fairly sure it is two additional vents in a CSL airdam to blow cold air on to the front brakes for race cars. Not needed for road cars, however we could start the AP / Alcon v's std argument up if we wanted some fun!

          Comment


            #6
            This sort of thing?

            Comment


              #7
              with regards to air intake thru headlamp , i saw a couple of cars with this setup at croft lately ,both noticed a drop in performance at the top end .trouble with this is that it causes a ram air effect when the car is designed to have still air in the filter box ,this is why standard csl intake is not direct .to get any joy with this setup the car would have to be mapped for correct fuelling at all different speeds etc ,then you have different wind/weather conditions .the cars i saw trying this obviously were running lean at full revs which is suicidefor an engine.bmw designed it like this so best to leave it alone i think .if it was possible to do it and get better results im sure they would of done it .

              Comment


                #8
                Nick, did you used to have an e60?

                Comment


                  #9
                  Hi Nick and welcome....thats a lot of mods...

                  Comment


                    #10
                    Originally posted by Nords View Post
                    Nick,

                    I think I have seen the front end you are talking about. I'm fairly sure it is two additional vents in a CSL airdam to blow cold air on to the front brakes for race cars. Not needed for road cars, however we could start the AP / Alcon v's std argument up if we wanted some fun!
                    Originally posted by Nords View Post

                    this is the thing i am talking about..the hole in the head lamp....

                    ttp://gallery.cslcup.co.uk/main.php/v/combe/CSLCup_Read_Combe_029.JPG.html

                    the thing on the bumper i am doing it at this time!!!!:thumbs:
                    a pair of holes with a brake back plate set, on the fronts to cool the brakes !!!


                    Originally posted by 1cosmicboy View Post
                    with regards to air intake thru headlamp , i saw a couple of cars with this setup at croft lately ,both noticed a drop in performance at the top end .trouble with this is that it causes a ram air effect when the car is designed to have still air in the filter box ,this is why standard csl intake is not direct .to get any joy with this setup the car would have to be mapped for correct fuelling at all different speeds etc ,then you have different wind/weather conditions .the cars i saw trying this obviously were running lean at full revs which is suicidefor an engine.bmw designed it like this so best to leave it alone i think .if it was possible to do it and get better results im sure they would of done it .
                    aaahh i see...
                    then i think i am going to leave it alone...thank you!!

                    Originally posted by Steve Gill View Post
                    Nick, did you used to have an e60?
                    no mate. never something besides 3 series....

                    Originally posted by Andyk View Post
                    Hi Nick and welcome....thats a lot of mods...
                    thank you...tell me about it....:banghead:

                    Comment

                    Working...
                    X