Calling Lawsy

[Hazy]

Your strip out mate...I only thought I had got the carpets to take out....I was so wrong! If you wanna proper strip it theres loads....

Stacks of wiring....complete loom nearside front to back
stacks of switches and control units
locks and mechanismsm etc in boot
all of the interior plastics bar the dash top
a tub of bolts,brackets and clips etc which currently weighs 4kg and counting....
the pollen filter housing (looks plastic, its steel and weighs loads!)
all wheel liners


I'm getting a bit obsessed with this weight loss thing now :hahaha: Anyone got the number for weight watchers:gayfight:

[AlexGTT]

:bigcry: Hazy, what have you done to my old smoker! It was a minter when I had her!:hahaha::thumbs:

[Hazy]

:bigcry: Hazy, what have you done to my old smoker! It was a minter when I had her!:hahaha::thumbs:

<Hazy shuffles his feet and looks down at the floor> :whistle::whistle::whistle:


joking aside it must be strange seeing the bollox ripped out of your old car mate?? I am sooooooo tempted to take the engine out and give it to John Toovey Race Engines to do his thing :hahaha:

[AlexGTT]

<Hazy shuffles his feet and looks down at the floor> :whistle::whistle::whistle:


joking aside it must be strange seeing the bollox ripped out of your old car mate?? I am sooooooo tempted to take the engine out and give it to John Toovey Race Engines to do his thing :hahaha:

Mate, just do it! I love it.:drool:

[shane@mbtech]

Thats what mine will be like Adam, currently half done now, just fitted the alcons, on ramps now ready for exhaust and suspension to go on.:thumbs:

[Curly]

Looking forward to seeing hazy-lawsy's finished motors:thumbs:

[Hazy]

Thats what mine will be like Adam, currently half done now, just fitted the alcons, on ramps now ready for exhaust and suspension to go on.:thumbs:

Wait till you try and get that tar like body sound proofing off!! its a nightmare, but I reckon 5-6kg in weight so worth it. The car may well float away if I'm not careful :hahaha::hahaha::hahaha:

[Hazy]

Looking forward to seeing hazy-lawsy's finished motors:thumbs:

last owner gave me and Radders a good base to work from:thumbs:

Whats that steel plate with the bars John, can it come out???

[Craig]

That a CSL or a normal M3?

[shane@mbtech]

That a CSL or a normal M3?

Normal M3, well it used to be normal, but its special now.:thumbs:

Looks like you have gutted it Adam,

Cage and carbon roof going in mine over christmas. All uneccessary things coming out, including all redundant wiring, just like you. You going down the route of plastic rear and side glass? Im leaving glass in mine for now.
I Love it.

[shane@mbtech]

last owner gave me and Radders a good base to work from:thumbs:

Whats that steel plate with the bars John, can it come out???

And John could peddle it too, keep it up next season.

Where did you have your little accident at oulton?

[Craig]

Ahh was going to say, my CSL didnt have any of that tar sound proofing.

[_Nathan_]

Lawsy - if you are keeping glass in the back (for remote locking and heated demisting) I've got a CSL screen you can make me an offer on, lighter than the M3 one.

[shane@mbtech]

Lawsy - if you are keeping glass in the back (for remote locking and heated demisting) I've got a CSL screen you can make me an offer on, lighter than the M3 one.

pm me a ball park, no idea what they fetch.:beer:

[Hazy]

Normal M3, well it used to be normal, but its special now.:thumbs:

Looks like you have gutted it Adam,

Cage and carbon roof going in mine over christmas. All uneccessary things coming out, including all redundant wiring, just like you. You going down the route of plastic rear and side glass? Im leaving glass in mine for now.
I Love it.

no sticking with glass, plastic puts me in the modified class, I wasnt a full on fire breathing MoFo of and engine before I go in that :supz:

And John could peddle it too, keep it up next season.

Where did you have your little accident at oulton?

yep, island, 110ish I guess :bigcry: