Wheel Spacers, what you using?

[rstoughy]

As title whats everyone using?

Type?
Size Rear?
Size Front?
Longer Studs?

Fancy improving the stance a little so this could be the 1st step.

Cheers,

[glendog74]

Eibach 12mm all round with KW Clubsport suspension.

[mattCSLnut]

12 mm H&R Hubcentric with longer bolts (obviously) at the front with the CSL 19" to give it a better stance, wider track and enough clearance for the NEW addition :whistle: The same 12 mm on the back with the "TRACK" 9J 18" to fill the rear arches on standard OE CSL suspension with 1.5 ish negative camber, up front.
Pix solutions below :hahaha:

[DuncanR]

Type? H & R hubcentric
Size Rear? 10mm
Size Front? 10mm
Longer Studs? I hope so...need to check !:whistle:
Running on 19" OEM & Cups

[DuncanR]

Pix solutions below :hahaha:

Matt you have pic solutions for everything .... ok.. what type of tits does your girlfriend/wife have !!! :hahaha:

[AlexGTT]

Sorry Matt, you'll have to try harder! Rob's spacer and wheel bolt picture was far better arranged than yours! Needs to be like this, eh Rob:gayfight::smokin:

[DuncanR]

Sorry Matt, you'll have to try harder! Rob's spacer and wheel bolt picture was far better arranged than yours! Needs to be like this, eh Rob:gayfight::smokin:

Dont piss Matt off yet !! we havent seen the tits pix solution :banghead:

[rstoughy]

H&R's are the ones that were taking my fancy so can now see a purchase coming (another one) :bigcry:

:thumbs:

[_Nathan_]

Why bother with longer bolts, just move to studs then you can switch between different spacers and wheel solutions without swapping them over the whole time!

[alexk]

CSL wheels :
Eibach 12mm front and rear with longer black bolts.
BBS CH wheels :
nothing ! they have bigger offset !!!
18" M3 wheels :
I don't know yet, I will try this weekend

[mattCSLnut]

Matt you have pic solutions for everything ....

You think ? :smt112

ok.. what type of tits does your girlfriend/wife have !!! :hahaha:

These are "SPECIAL" :drool: for my eyes only Pix solutions :blalalala:

[mattCSLnut]

I'm so very very very very extremely SORRY :blalalala: Alex for a rush job on my H&R pix solutions :gayfight: with my mobile phone :whistle:

Sorry Matt, you'll have to try harder! Rob's spacer and wheel bolt picture was far better arranged than yours! Needs to be like this, eh Rob:gayfight::smokin:

[mattCSLnut]

Why bother with longer bolts, just move to studs then you can switch between different spacers and wheel solutions without swapping them over the whole time!

Very much under consideration Nathan :whistle:

[DuncanR]

Why bother with longer bolts, just move to studs then you can switch between different spacers and wheel solutions without swapping them over the whole time!

Been thinking along those lines so that i can be even more like my CSL mentor T$ ! ... will just ordinary "all thread" from the hardware store do ?:whistle: Supplier solutions please, or if I know grade of steel I can get from own supplier.:smokin:

[shimmy]

H&R's are the ones that were taking my fancy so can now see a purchase coming (another one) :bigcry:

:thumbs:

studs look cack!

I run 12mm eibach with 38mm bolts on my road rims cos it looks nice

and I run 3mm front Volks spacers on my VRG2 so they clear the suspension shock/spring with 30mm bolts, none on the rear.