Performance Friction Discs for AP Kit, where to buy?

[cantfind1]

Hey guys, see some of you are running this combo and it looks good and I am not happy with the AP discs at all!

Where is the best/cheapest place to buy the PF discs for the AP bell from? Also will need new bolts I understand?

[TMAQ]

i picked mine up from http://www.interspares.com/ .... questmead are also good on price i hear. i'll find out what bolt/washer kit you need...

[TMAQ]

this should be right...

front PF front discs, part numbers 356.32.0054.03 & 04. (for the AP kit... CP5575-1004)
you will need the bolt/washer kit x2 - CP3845-101K12

[glendog74]

i picked mine up from http://www.interspares.com/ .... questmead are also good on price i hear. i'll find out what bolt/washer kit you need...

Questmead don't supply PF discs - that's their enemy after all! :hahaha:

If you look at the banners above, a PF ad appears now and then :whistle:

[TMAQ]

Questmead don't supply PF discs - that's their enemy after all! :hahaha:

If you look at the banners above, a PF ad appears now and then :whistle:

news to me :thumbs:

[glendog74]

news to me :thumbs:

Questmead are AP main dealer in UK

[glendog74]

Performance Friction UK:

Performance Friction, Europe

Carbon Metallic House
Compton Park
Wildmere Road
Banbury, Oxon OX16 3LU
Tel: (0)1295 221020
Fax: (0)1295 279711

[shimmy]

try Alyn at ASPerformance and say i sent you from CSLreg

[TMAQ]

Questmead are AP main dealer in UK

Performance Friction UK:

Performance Friction, Europe

Carbon Metallic House
Compton Park
Wildmere Road
Banbury, Oxon OX16 3LU
Tel: (0)1295 221020
Fax: (0)1295 279711

thanks. i will bear that in mind.

:hahaha:

[cantfind1]

Cheers chaps will try these guys tomorrow, already spoke directly to performance friction but will see what the other guys can do.
:thumbs:

[Bealo]

I was going to say ask Shimmy but he's already posted. I'll go back to sleeping :thumbs:

[cantfind1]

Nice one Shimmy! ASperformance best price. ordered and on their way with bolt kit as well. Torque the bolts to 14nm is that right seems very low?!

[shimmy]

Nice one Shimmy! ASperformance best price. ordered and on their way with bolt kit as well. Torque the bolts to 14nm is that right seems very low?!

No that's correct

I had to buy a frickin new torque wrench for it.

[jibm]

Nice one Shimmy! ASperformance best price. ordered and on their way with bolt kit as well. Torque the bolts to 14nm is that right seems very low?!

Just out of interest, what was the price?:thumbs:

[escarolo]

I bougth them in Demon Tweeks

https://nam3forum.com/forums/forum/csl-register/general/csl-technical-area/511870-replacing-front-discs