Tyre pressure warnig

[flow_csl]

Hi ,

The tyre pressure warning light stays on in my car .
Last week i changed my oem CSL wheels for my BBS CH with cups tyre for a ring day . I already did this many time before .

But now i can't get the tyre warning off .
The tyre pressure is fine , all the tyres have 2.2 bar .
When i push the tyre pressure button the light goed out but after 2 min it comes back on . I already did the SMG resest thingy .

[Sailorbaz]

You have to reset Tyre pressure warning thing mate. Check the Manual, I can't remember off the top of my head.

Something like, press and hold the button before you start the car, start and drive off. It was sort itself out. It's defo in the handbook though. HTH.

[rstoughy]

Yep thats it, turn Ignition on then press and hold the button in until the light goes off.
Should be fine after that.
Mine went all weird on me when i put my Cups on and required this to be done.

[shimmy]

didnt adjust mine until i got home today - rear left was at 22 psi :banghead:

[DuncanR]

didnt adjust mine until i got home today - rear left was at 22 psi :banghead:

All the weight is on the other side of the car mate !!:whistle:

PS Thx for the NS SF & SPLITS not tried them yet, had same prob as you with vid this week end, too much glare when cam is moved back in car, needs to stay on the front screen really, and its a shame as I got some good footage of moi, T$ , and Nathan CSL

[shimmy]

All the weight is on the other side of the car mate !!:whistle:

PS Thx for the NS SF & SPLITS not tried them yet, had same prob as you with vid this week end, too much glare when cam is moved back in car, needs to stay on the front screen really, and its a shame as I got some good footage of moi, T$ , and Nathan CSL

i domnt think the bullet lens copes very well with the dark inside of the car looking out at the daylight!



oh.................., and CUNT :smokin:

[DuncanR]

i domnt think the bullet lens copes very well with the dark inside of the car looking out at the daylight!

Any ideas Nathan? what about a filter ? would appear that the front of the cam has to at least be past the front seats Shim, did get away with mine in the window at the Ring last time, just said it wasnt connnected, we should get a bit more leeway seeing as we let them thro to next round of WC so easy !

[flow_csl]

Yep thats it, turn Ignition on then press and hold the button in until the light goes off.
Should be fine after that.
Mine went all weird on me when i put my Cups on and required this to be done.

Did that last night .

Turn on the ignition .
Press the button thill the red light goed out .
Press the button again , the light turns amber .
Release the button and the light goes out .

All fine now .

[Dan_csl]

Did that last night .

Turn on the ignition .
Press the button thill the red light goed out .
Press the button again , the light turns amber .
Release the button and the light goes out .

All fine now .

This is just what I need as I can't remember the procedure and have done it 3 times (incorrectly) now and the light still keeps coming on after putting my winter tyres back on last night, will have a go at lunch time :thumbs:

[glendog74]

after putting my winter tyres back on last night

:smt017 in September?









:gayfight:

[shimmy]

:smt017 in September?


:gayfight:

:thumbs::hahaha:




snowing round here mate!



,

[Dan_csl]

:smt017 in September?




:gayfight:

ALL 4 Cups were past the legal limit and needing to drive to Murkett's this month I'm not risking either an accident or getting stopped and them finding 4 bald tyres! :whistle:

Sadly, the Cups are dead and have gone to tyre heaven... :bigcry: