Originally posted by lawsy
View Post
Announcement
Collapse
No announcement yet.
Remaps- are they worthwile?
Collapse
X
-
So Matt you had it done at evolve? They do a very good map, but you can get better!
Well anyone that wants some real info can PM me I am not writing it on here! Having had various maps over the years from different companies and now a full airbox conversion I can honestly say there are only two companies 2 go to. They have been mentioned already in this thread and have a very good reputation for a reason.
Lawsy you know who they are.
Comment
-
Originally posted by lawsy View PostHow did I know then, I only know from reading on here
https://nam3forum.com/forums/forum/csl-register/csl-register-main-discussion-centre/394107-dms-remaphi all had a 330d dms and made a big difference to power over standard thinking of getting csl remaped anyone know if its worth doing?
Scroll down you bellend:birdman:
Busted Matt :hahaha:
Comment
-
I say Shane... is it time to break open the gun cabinet old boy ??!!Originally posted by lawsy View PostI forget nothing Rob:thumbs:
Thats why certain people are dead men walking
:smokin:
bugger ...thats not funny at the moment is it !!! ... wasnt last time either as I recall :banghead:....
Comment
-
Matts was done at DMS mate:thumbs:Originally posted by cantfind1 View PostSo Matt you had it done at evolve? They do a very good map, but you can get better!
Well anyone that wants some real info can PM me I am not writing it on here! Having had various maps over the years from different companies and now a full airbox conversion I can honestly say there are only two companies 2 go to. They have been mentioned already in this thread and have a very good reputation for a reason.
Lawsy you know who they are.
Pm me the shit:smokin:
Comment
-
Originally posted by DuncanR View PostI say Shane... is it time to break open the gun cabinet old boy ??!!
bugger ...thats not funny at the moment is it !!! ... wasnt last time either as I recall :banghead:....
Comedy Dunc-timing is everything old chap. You are a legend.
For the people on my list, a gun would be too quick
.
Comment
-
eVOLVE = dms = evolve .... fook couldnt even get that right ! :banghead:Originally posted by lawsy View PostMatts was done at DMS mate:thumbs:
Pm me the shit:smokin:
BTW it is my intention to leave my brand new engine the fook alone with regards to remapping, getmapping or even fookin googlemapping ...so... if anyone wishes to use MY trusty steed as a benchmark in ANY kind of test whatsoever, .....tough ! lol.... let me know, however, bring tissues just in case your £600+ remap gets its ass wiped through "Crucial driver inputs":supz: ... great line Nath !
Comment
-
Im not exactly Billy the Fookin Kid myself Lawsy !! especially with 32" barrels :hahaha:Originally posted by lawsy View Post
For the people on my list, a gun would be too quick
.
Back on the subject, a thread which may be of interest http://forums.m3cutters.com/showthread.php?p=187573
From the AAT site mmmmm
- Live Mapping
We really love this one, many companies are claiming to be different because they offer live mapping for their customers, making them some what special! this is where they will connect a laptop up to your car's diagnostic connector and drive the car while another person "live map's the car", or should i say pretends to map the car. LIVE MAPPING CAN NOT BE DONE THROUGH THE DIAGNOSTIC CONNECTOR OF ANY CAR! The data cannot be extracted at a fast enough rate to be able to carry out a live map. The only correct way is to open the vehicle's ecu and connect an emulator, so you can transfer the data from the ecu in REAL TIME. along side this certain diagnostic tools and analysers are needed like air fuel ratio meter and det detect equipment if need be.
Ok so lets say after all that a company is able to live map, who says they are any good at it? You have to remember that a HIGHLY DEVELOPED custon map is going to be miles better than a POOR live map. It takes years of experience to be able to live map successfully! Lastly somebody cannot live map modern cars 100% unless of course they have original manufacturer tooling to do so. These tools are specific to the manufacturer only, and is not possible to purchase. So dont fall for it!
Comment
-
Originally posted by mattCSLnutAfter all that :banghead: are U taking the P**S ? :hahaha:
No, it was Rob @ DMS who did my re-map :thumbs: give him a call if U want a proper RR re-map. U wont be disappointed. :beer:
http://www.dmsautomotive.com
Matt we need to street-race our CSLs next time (god knows when
) we will meet.
I challenge you ! :smt065
:smt003
Comment
-
Originally posted by mattCSLnutAfter all that :banghead: are U taking the P**S ? :hahaha:
No, it was Rob @ DMS who did my re-map :thumbs: give him a call if U want a proper RR re-map. U wont be disappointed. :beer:
http://www.dmsautomotive.com
Sorry just looked at the picture! looks very similar to evolve garage!
Comment

Comment