Max camber with all original parts?

[magnust]

I've searched but haven't found info on what max camber can be set in the front and in the back with all original parts. Anyone know?

On my M3 E36 3.2 i swapped the left and right top mounts in the front which gave me a well working -3.2 camber which I drove with for many years. I noticed the CSL top mounts are offset in a similar fashion so swapping them would - if it's possible to swap them on a E46 - give added negative camber, but I have no idea what the adjustment range would be. I've tried to google for this info but came up empty. Anyone know?


TIA!

[Thorney]

Depends on the chassis but not much more than 1.8 on the front, less is more likely

[_Nathan_]

http://www.madrussian.net/m3/diy_camber.shtml

Link on there no longer working but indicates you can swap them over as per e36

[alexk]

Friend from Greece has tried this in his CSL and it was working.

[magnust]

Thanks for the info! I'll give the swap a go and keep my fingers crossed for decent camber values!

http://www.madrussian.net/m3/diy_camber.shtml

Link on there no longer working but indicates you can swap them over as per e36

Yeah, too bad that page is missing. I'll give google another shot.

[magnust]

:hahaha:


I googled and found the best info at..... my own web site :hahaha: :hahaha: :hahaha:

http://rejsa.nu/forum/viewtopic.php?t=32254

[magnust]

Tada!

http://web.archive.org/web/20070115064230/http://e46m3performance.com/installs/strut-top/index.htm