Intrax 1K2 Ride Height

[azrael]

What do you guys run?

[ando]

IIRC Simpsons set mine at 640mm rear 645mm front from the top of he arch to the ground.


Ando

[s.mac]

I had mine set to standard height, I'm not sure if its dropped (now the springs have settled) or if its still the same ( I cant remember standard), I've just had a measure, I need a geo and may drop it a tad but don't think I would drop it to the above

665mm fr
660mm r

[shimmy]

Mine was set at 645F 640R last year but this time it sense to be 640F 632R

[glendog74]

I had mine set to standard height, I'm not sure if its dropped (now the springs have settled) or if its still the same ( I cant remember standard), I've just had a measure, I need a geo and may drop it a tad but don't think I would drop it to the above

665mm fr
660mm r

You ditched running the AST setup and gone Intrax instead Steve? :whistle:

[s.mac]

no mate, I just thought I would throw my ride height in dude :hahaha:

to be fare, I have just re fitted a rear strut as it had leaked, I was measuring up to see how it stood to the height ando said, mine looks a tad high and I need to sort it.
Rear strut re sealed FOC by AST, not bad I thought after the stick they had last year, some of those curbs are getting quite high on tracks and bumpy .... :whistle:

[glendog74]

no mate, I just thought I would throw my ride height in dude :hahaha:

Lol - random!

When you coming down to Cornwall next mate? :beer:

[s.mac]

I was due in May but Bounce fobbed me off :whistle: then I was due this weekend but work has been a mare :bigcry:

I will pm you and Bret with my plans, I have a week booked with the family and its before the schools break up and it gets too busy

and yes it was random:hahaha:

[AlexGTT]

Mine is set 645f 640r as well. Was a tad lower but had it raised a little.

[Bounce]

I was due in May but Bounce fobbed me off :whistle:

:hahaha::hahaha: Ive been out of the county for 3weekends in May,your welcome anytime mate[fookin free loader]

[s.mac]

[azrael]

Thanks for the replies guys... except you ando... and s.mac, shimmy, glendog74, alexgtt, bounce... Not you, guys back there. Not you, henchman holding wrench. Not you, henchman arbitrarily turning knobs, making it seem like you're doing something! :-)

[s.mac]

:hahaha:

[AlexGTT]

Thanks for the replies guys... except you ando... and s.mac, shimmy, glendog74, alexgtt, bounce... Not you, guys back there. Not you, henchman holding wrench. Not you, henchman arbitrarily turning knobs, making it seem like you're doing something! :-)

Hey!! Everything Joe doesn't do on my car I do.

:whistle:Come to think of it that only leaves driving it.

Oh! And adjusting tyre pressures. I do that very well!

[glendog74]

I was due in May but Bounce fobbed me off :whistle: then I was due this weekend but work has been a mare :bigcry:

I will pm you and Bret with my plans, I have a week booked with the family and its before the schools break up and it gets too busy

and yes it was random:hahaha:

:hahaha::hahaha: Ive been out of the county for 3weekends in May,your welcome anytime mate[fookin free loader]

Sweet - i'll make sure i am out of the County like Brett! :hahaha: :hahaha: