Announcement

Collapse
No announcement yet.

Fault Code Help please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Fault Code Help please

    I have 4 fault codes and just wanted to understand two of them.

    Anybody know what this means or could mean :whistle:

    ....P0134 O2 Sensor Circuit No activity detected (Bank 1 Sensor 1)

    ....P1747 Unknown


    (the other two are 'cat' codes caused by my 100 cell cats and exhaust i think)

    No change to the way the car runs as far I can tell:smokin:

    #2
    Shimmy,

    The below link might give you some insight!

    Cheers,
    Grant

    Comment


      #3
      ipod

      Im no expert but i think the 'P1747' code you mention is related to the fact that your plugged into the CAN bus communication systems with your ipod diagnostic tool.

      PP

      Comment


        #4
        Originally posted by pinkpanther008 View Post
        Im no expert but i think the 'P1747' code you mention is related to the fact that your plugged into the CAN bus communication systems with your ipod diagnostic tool.

        PP
        Hmmmmmmmm, it seemed to go away when I unplugged it :hahaha:

        Comment


          #5
          Get a decent scan tool on it Shim!! Tight arse! LOL :gayfight:

          But seriously if you have an O2 sensor fault it is either a buggered sensor, blown fuse in ecu bay(there are only about5 fuses in there from memory 20 and 30 amp), or sometimes a short as the sheath from the pre cat o2 sensors sometimes wears on the steering column exposing the wiring can cause a short as well.

          Comment


            #6
            will get it checked properly next week, and have a spare soemwhere as well.:thumbs:

            Comment

            Working...
            X