Help / Advice please, DSC & ABS Failed?

[manos///3]

I had the same problem before 4 months. Same lights on the dash.
Gt1 didn't recognize any fault. Just reset them and everything is ok since then!

[Dan_csl]

DSC Pressure sensor (one of the two on the brake master cylinder).

Basically measures brake pressure - most likely the one closer to the firewall that's failed (the bitch one to take out).

If you plug it in the GT1 one sensor will show pressure whilst the other show 0psi

Thanks Tom, it'll more than likely be a warranty job if anything gets replaced so should save me the hassle.

I had the same problem before 4 months. Same lights on the dash.
Gt1 didn't recognize any fault. Just reset them and everything is ok since then!

How did you reset it Manos, using the GT1 I assume?

[manos///3]

How did you reset it Manos, using the GT1 I assume?

Gt1 off course!