Announcement

Collapse
No announcement yet.

Adjustable control arms

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
    #1

    Adjustable control arms

    Happy new year to you all.
    Got a few little mods for xmas inc some uuc motorwerks adjustable rear control arms. I changed them on my e36 M3 and had to drop the diff to get the inner bolts out is this the case on the CSL anyone no ? If so i will change all the rear bushes at the same time thanks
    Tags: None
    #2
    Originally posted by CLAYTON
    Happy new year to you all.
    Got a few little mods for xmas inc some uuc motorwerks adjustable rear control arms. I changed them on my e36 M3 and had to drop the diff to get the inner bolts out is this the case on the CSL anyone no ? If so i will change all the rear bushes at the same time thanks
    Not really a worthwhile mod IMO, standard arms have enough adjustment.

    But yes you do have to drop the diff carrier down,

    Comment

      #3
      On the oem we only got -2 deg I seem to be wearing the outside of the rear tyers a little im runing -3.5 front and want to run -2.5 on the rear am i wasting my time for -.5 of a deg whats your thoughts?

      Comment

        #4
        Originally posted by CLAYTON View Post
        On the oem we only got -2 deg I seem to be wearing the outside of the rear tyers a little im runing -3.5 front and want to run -2.5 on the rear am i wasting my time for -.5 of a deg whats your thoughts?
        I used standard arms at 2* on rear, 3.5* front no uneven wear whatsoever.

        I used primarily for track.

        What state is your geo in?

        What rtab have you installed, limiter kit? Age of bushes etc.

        Your wear issues could be down to poor alignment or worn bushes or combo of both?

        Comment

          #5
          Originally posted by lawsy View Post
          I used standard arms at 2* on rear, 3.5* front no uneven wear whatsoever.

          I used primarily for track.

          What state is your geo in?

          What rtab have you installed, limiter kit? Age of bushes etc.

          Your wear issues could be down to poor alignment or worn bushes or combo of both?
          New oem rta bushes with limiter kit used for the ring only, geo spot on have it done buy master tec and myself at bm every year
          only talking about very miner wear to the out side edage mybe im being over fussy thanks for the advise think i will leave it as it is for the time being

          Comment

          Previous template Next
          Working...
          X