AP Bolt Spec?

[karbonkid]

Anyone know Spec of the AP Bolt Shown as (6) below. M_? Length?
Need 1 on the hurry up! Waiting for Questmead to call me back but may try sourcing from Bolt store if I know Spec.

[shane@mbtech]

Ive got a set on the bench in work, ill let you know tomorrow what the bolt is.

[karbonkid]

Ive got a set on the bench in work, ill let you know tomorrow what the bolt is.

Star! Tvm

[phoenixcsl]

.

[karbonkid]

Alex,

I bought some last week the part number for the kit is:

CP3845-101K12

Bolt measurements: 0.25" x 1.0".

Assuming you mean the bolts which attach to the bell - I cant see the picture as at work...!

Cheers Toby, yes ones that fits behind disc, bracket to caliper (not caliper to bracket) Will check my local to see if they stock it.

Lawsy your too slow :blalalala:
...although happy for you to check yours. :thumbs:

[phoenixcsl]

I gave you the wrong part numbers Alex, so ignore my post mate...the ones I gave you are to replace the disc bolts to the bell.

I wrongly assumed thats what you wanted, as I can't see the pic you put up from work...(websense rubbish).

[karbonkid]

No worries. Il ignore that then. It's still early for some

Questmead have called this AM and have spec and part number. :thumbs: